SolarBazaar
Victron Energy - BlueSolar MPPT Charge Controller 150/45
Charge Controllers

Victron Energy - BlueSolar MPPT Charge Controller 150/45

$ 397.8USD · price may vary

Victron EnergyBrandVictron Energy
Model
SCC010045300
Specifications
0

Overview

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.

Ultrafast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.

Advanced Maximum Power Point Detection in case of partial shading conditions

If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency

No cooling fan. Maximum efficiency exceeds 98%. Full output current up to 40°C (104°F).

Flexible charge algorithm

Fully programmable charge algorithm (see the software page on our website), and eight preprogrammed algorithms, selectable with a rotary switch (see manual for details).

Extensive electronic protection

Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.

Internal temperature sensor

Compensates absorption and float charge voltage for temperature.

Real-time data display options

Color Control GX or other GX devices: see the Venus documents on our website.

A smartphone or other Bluetooth-enabled device: VE.Direct Bluetooth Smart dongle needed.

Still Have Questions About BlueSolar MPPT Charge Controller 150/45? Give us a call today 1-877-242-2792

What these specifications mean

Detailed specifications for Victron Energy - BlueSolar MPPT Charge Controller 150/45 have not been published yet. Victron Energy lists this charge controller in the Charge Controllers, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a charge controller, the figures that matter most are rated charge current in amps, which must exceed the array's short-circuit current with margin, maximum PV open-circuit voltage, the hard limit that must survive cold-morning Voc rise, supported battery voltages (12/24/36/48 V) and chemistries and conversion efficiency, typically 96–99% for a good MPPT unit. In any system with a battery and a separate array, the controller is what protects the most expensive component and determines how much of the array's output actually reaches storage.

What to check before ordering

The checks below apply to any charge controller. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

  • Size the current rating from array watts divided by battery voltage, then add at least 25% margin for cold, bright conditions where panels exceed their rated output.
  • Check the maximum PV input voltage against the array's Voc at your coldest expected temperature, not at 25 °C — Voc rises as temperature falls, and exceeding the limit destroys the controller instantly.
  • Confirm the controller supports your battery chemistry with the right charge profile. Lithium, AGM, gel and flooded batteries need different absorption and float voltages.
  • Prefer a unit with temperature compensation or a battery temperature sensor if the bank lives somewhere that gets hot or cold.

What people get wrong

  • Sizing on rated array watts alone and ignoring the voltage ceiling, which is the most common way controllers are killed.
  • Using a PWM controller with a high-voltage grid-tie panel — the voltage mismatch wastes a large share of the panel's output.
  • Running the load output beyond its rating instead of wiring heavy loads directly to the battery through a fuse.

Price and availability

Victron Energy - BlueSolar MPPT Charge Controller 150/45 is listed at $ 398 (USD). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Victron Energy locally before ordering.

Victron Energy - BlueSolar MPPT Charge Controller 150/45 — frequently asked questions

How much does Victron Energy - BlueSolar MPPT Charge Controller 150/45 cost?

Victron Energy - BlueSolar MPPT Charge Controller 150/45 is listed at $ 398 (USD). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes Victron Energy - BlueSolar MPPT Charge Controller 150/45?

Victron Energy - BlueSolar MPPT Charge Controller 150/45 is a Victron Energy product, listed under charge controllers with model reference SCC010045300. The Victron Energy brand page lists the rest of its range so you can compare across the catalogue.

Is Victron Energy - BlueSolar MPPT Charge Controller 150/45 right for my system?

That depends on what it has to connect to. For a charge controller, check supported battery voltages (12/24/36/48 V) and chemistries, conversion efficiency, typically 96–99% for a good MPPT unit and whether it offers a load output, temperature compensation and remote monitoring against the rest of your equipment before price enters the decision. Size the current rating from array watts divided by battery voltage, then add at least 25% margin for cold, bright conditions where panels exceed their rated output.

Where can I buy Victron Energy - BlueSolar MPPT Charge Controller 150/45?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.

Write a Review

Share your experience — no account needed.

Your rating *

Related Products