Charge Controllers

Fusion MPPT Solar Charge Controller 40 Amps 24 Volt

₹ 8,500INR · price may vary

Model: Fusion 4024
Specifications: 0

Overview

Fusion 4024 is a solar management unit which converts a normal grid inverter into hybrid solar inverters. The device is powered by latest generation microprocessor and Pure MPPT Technology. It makes your solar system generate maximum solar power – 30% more than ordinary charge controllers. The micro-processor enabled three stage charging ensures optimum charging of batteries which increases their life by 6 months.

This product converts an existing ups/ inverter into a solar hybrid inverter. It is a 40 amps pure mppt solar management unit that connects with single (12 v), and double (24v) batteries.

Product Descriptions

System rating

40 Amp @ 12/24 Volt

Charging current (max)

40 Amp

Panel Support

Up to 1,200 watts

Technology

pure mppt

Wire Size (max)

6 sq mm

Auto Battery Selection

12-24 Volt

VoC

36V ~ 100V

Product Video

Special Features

Supports Up to 700 watts of solar panel (12 /24 Volt) on single battery and 1200 watts of solar panel on double battery system.

protections provided against short-circuit, voltage fluctuations

lcd display is provided for easy monitoring of the system.

Display: LCD indications

power available - mains on

connected with electricity - mains connected

battery low warning

charging from solar - solar charging

rupee savings

Display - LED Indications (ON/ OFF / BLINKING)

Blue Led On - Home appliances is running from solar panels

Green Led On - Solar Power is available.

Red Led On - Battery is charging through Solar panels.

Applications

off-grid solar systems #

Installation Manual : Download product Installation and operation manual

How to read this datasheet

Detailed specifications for Fusion MPPT Solar Charge Controller 40 Amps 24 Volt have not been published yet. Loom Solar lists this charge controller in the Charge Controllers, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a charge controller, the figures that matter most are whether it offers a load output, temperature compensation and remote monitoring, type: MPPT or PWM, rated charge current in amps, which must exceed the array's short-circuit current with margin and maximum PV open-circuit voltage, the hard limit that must survive cold-morning Voc rise. In any system with a battery and a separate array, the controller is what protects the most expensive component and determines how much of the array's output actually reaches storage.

What to check before ordering

The checks below apply to any charge controller. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Size the current rating from array watts divided by battery voltage, then add at least 25% margin for cold, bright conditions where panels exceed their rated output.
Check the maximum PV input voltage against the array's Voc at your coldest expected temperature, not at 25 °C — Voc rises as temperature falls, and exceeding the limit destroys the controller instantly.
Confirm the controller supports your battery chemistry with the right charge profile. Lithium, AGM, gel and flooded batteries need different absorption and float voltages.
Prefer a unit with temperature compensation or a battery temperature sensor if the bank lives somewhere that gets hot or cold.

Where buyers lose money

Sizing on rated array watts alone and ignoring the voltage ceiling, which is the most common way controllers are killed.
Using a PWM controller with a high-voltage grid-tie panel — the voltage mismatch wastes a large share of the panel's output.
Running the load output beyond its rating instead of wiring heavy loads directly to the battery through a fuse.

Price and availability

Fusion MPPT Solar Charge Controller 40 Amps 24 Volt is listed at ₹ 8,500 (INR). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Loom Solar locally before ordering.

Fusion MPPT Solar Charge Controller 40 Amps 24 Volt — frequently asked questions

How much does Fusion MPPT Solar Charge Controller 40 Amps 24 Volt cost?

Fusion MPPT Solar Charge Controller 40 Amps 24 Volt is listed at ₹ 8,500 (INR). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes Fusion MPPT Solar Charge Controller 40 Amps 24 Volt?

Fusion MPPT Solar Charge Controller 40 Amps 24 Volt is a Loom Solar product, listed under charge controllers with model reference Fusion 4024. The Loom Solar brand page lists the rest of its range so you can compare across the catalogue.

Is Fusion MPPT Solar Charge Controller 40 Amps 24 Volt right for my system?

That depends on what it has to connect to. For a charge controller, check rated charge current in amps, which must exceed the array's short-circuit current with margin, maximum PV open-circuit voltage, the hard limit that must survive cold-morning Voc rise and supported battery voltages (12/24/36/48 V) and chemistries against the rest of your equipment before price enters the decision. Choose MPPT over PWM for anything beyond a very small array. An MPPT controller harvests roughly 20–30% more energy because it converts excess panel voltage into charge current instead of throwing it away.

Where can I buy Fusion MPPT Solar Charge Controller 40 Amps 24 Volt?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.