Charge Controllers

Midas 30 Amp MPPT Solar Charge Controller

A$ 145AUD · price may vary

Model: HY-MY30
Specifications: 0

Overview

99.5% MPPT Tracking, 98% Efficiency

Auto Temp Compensation & 4-Stage Charging

12V/24V Auto Detect, Supports LiFePO₄, Gel, Sealed, Flooded

Full Protection & LCD Display

Durable Die-Cast Aluminum Design

What these specifications mean

Detailed specifications for Midas 30 Amp MPPT Solar Charge Controller have not been published yet. ACOPOWER lists this charge controller in the Charge Controllers, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a charge controller, the figures that matter most are conversion efficiency, typically 96–99% for a good MPPT unit, whether it offers a load output, temperature compensation and remote monitoring, type: MPPT or PWM and rated charge current in amps, which must exceed the array's short-circuit current with margin. In any system with a battery and a separate array, the controller is what protects the most expensive component and determines how much of the array's output actually reaches storage.

Choosing a charge controller: the checks that matter

The checks below apply to any charge controller. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Check the maximum PV input voltage against the array's Voc at your coldest expected temperature, not at 25 °C — Voc rises as temperature falls, and exceeding the limit destroys the controller instantly.
Confirm the controller supports your battery chemistry with the right charge profile. Lithium, AGM, gel and flooded batteries need different absorption and float voltages.
Prefer a unit with temperature compensation or a battery temperature sensor if the bank lives somewhere that gets hot or cold.
Choose MPPT over PWM for anything beyond a very small array. An MPPT controller harvests roughly 20–30% more energy because it converts excess panel voltage into charge current instead of throwing it away.

Where buyers lose money

Sizing on rated array watts alone and ignoring the voltage ceiling, which is the most common way controllers are killed.
Using a PWM controller with a high-voltage grid-tie panel — the voltage mismatch wastes a large share of the panel's output.
Running the load output beyond its rating instead of wiring heavy loads directly to the battery through a fuse.

Price and availability

Midas 30 Amp MPPT Solar Charge Controller is listed at A$ 145 (AUD). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports ACOPOWER locally before ordering.

Midas 30 Amp MPPT Solar Charge Controller — frequently asked questions

How much does Midas 30 Amp MPPT Solar Charge Controller cost?

Midas 30 Amp MPPT Solar Charge Controller is listed at A$ 145 (AUD). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes Midas 30 Amp MPPT Solar Charge Controller?

Midas 30 Amp MPPT Solar Charge Controller is a ACOPOWER product, listed under charge controllers with model reference HY-MY30. The ACOPOWER brand page lists the rest of its range so you can compare across the catalogue.

Is Midas 30 Amp MPPT Solar Charge Controller right for my system?

That depends on what it has to connect to. For a charge controller, check maximum PV open-circuit voltage, the hard limit that must survive cold-morning Voc rise, supported battery voltages (12/24/36/48 V) and chemistries and conversion efficiency, typically 96–99% for a good MPPT unit against the rest of your equipment before price enters the decision. Confirm the controller supports your battery chemistry with the right charge profile. Lithium, AGM, gel and flooded batteries need different absorption and float voltages.

Where can I buy Midas 30 Amp MPPT Solar Charge Controller?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.