Charge Controllers
Charge Controllers
BrandVictron Energy
Victron SmartSolar MPPT
$ 612.85USD · price may vary
BrandVictron Energy- Model
- 1593101
- Specifications
- 0
Overview
Victron SmartSolar MPPT: Using cutting-edge technology, SmartSolar maximizes the energy harvesting capability of a solar charge controller to intelligently achieve max charge in the shortest possible time.
Victron SmartSolar MPPT Features
Ultra Fast MPPT
The MPPT VE.Can SmartSolar charger connects to a PV array of 150 or 250 Volt Voc and will automatically detect and charge your 12, 24, or 48V battery bank with current ranging from 70 to 100A depending on the model. The charge settings are fully programmable and can even be set up for different battery chemistries, like lead-acid, lithium and others.
Remote Monitoring and Control
The MPPT VE.Can SmartSolar charger can be remotely controlled and configured over Bluetooth via the VictronConnect App. This allows device set-up, management, and at-a-glance information, such as battery voltage and current, PV voltage and current, and historical data.
Load Output
Configure the voltage at which SmartSolar disconnects a load.
Daisy Chain Additional Units
The VE.Can SmartSolar charger is equipped with CAN bus ports. This allows for communication with additional VE.Can SmartSolar chargers. The additional units are simply “daisy chained” to each other with a single RJ45 cable between the individual units.
When connected to each other, all individual VE.Can SmartSolar chargers, will synchronise their charge stages. They can also send their data, via a single cable, to a GX monitoring device.
Still have questions? Give us a call at 877-242-2792
Reading the specifications
Detailed specifications for Victron SmartSolar MPPT have not been published yet. Victron Energy lists this charge controller in the Charge Controllers, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.
For a charge controller, the figures that matter most are supported battery voltages (12/24/36/48 V) and chemistries, conversion efficiency, typically 96–99% for a good MPPT unit, whether it offers a load output, temperature compensation and remote monitoring and type: MPPT or PWM. In any system with a battery and a separate array, the controller is what protects the most expensive component and determines how much of the array's output actually reaches storage.
What to check before ordering
The checks below apply to any charge controller. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Check the maximum PV input voltage against the array's Voc at your coldest expected temperature, not at 25 °C — Voc rises as temperature falls, and exceeding the limit destroys the controller instantly.
- Confirm the controller supports your battery chemistry with the right charge profile. Lithium, AGM, gel and flooded batteries need different absorption and float voltages.
- Prefer a unit with temperature compensation or a battery temperature sensor if the bank lives somewhere that gets hot or cold.
- Choose MPPT over PWM for anything beyond a very small array. An MPPT controller harvests roughly 20–30% more energy because it converts excess panel voltage into charge current instead of throwing it away.
What people get wrong
- Sizing on rated array watts alone and ignoring the voltage ceiling, which is the most common way controllers are killed.
- Using a PWM controller with a high-voltage grid-tie panel — the voltage mismatch wastes a large share of the panel's output.
- Running the load output beyond its rating instead of wiring heavy loads directly to the battery through a fuse.
Price and availability in Saudi Arabia
Victron SmartSolar MPPT is listed at $ 613 (USD) for Saudi Arabia. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Saudi Arabia: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Victron Energy locally before ordering.
Victron SmartSolar MPPT — frequently asked questions
How much does Victron SmartSolar MPPT cost?
Victron SmartSolar MPPT is listed at $ 613 (USD) for Saudi Arabia. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.
Who makes Victron SmartSolar MPPT?
Victron SmartSolar MPPT is a Victron Energy product, listed under charge controllers with model reference 1593101. The Victron Energy brand page lists the rest of its range so you can compare across the catalogue.
Is Victron SmartSolar MPPT right for my system?
That depends on what it has to connect to. For a charge controller, check rated charge current in amps, which must exceed the array's short-circuit current with margin, maximum PV open-circuit voltage, the hard limit that must survive cold-morning Voc rise and supported battery voltages (12/24/36/48 V) and chemistries against the rest of your equipment before price enters the decision. Check the maximum PV input voltage against the array's Voc at your coldest expected temperature, not at 25 °C — Voc rises as temperature falls, and exceeding the limit destroys the controller instantly.
Where can I buy Victron SmartSolar MPPT in Saudi Arabia?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Saudi Arabia — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.
