SolarBazaar
Mission Solar 395 Watt PERC 66 Cell PV Solar Panel | MSE395SX9R
Solar Panels

Mission Solar 395 Watt PERC 66 Cell PV Solar Panel | MSE395SX9R

$ 349USD · price may vary

Mission SolarBrandMission Solar
Model
MSE395SX9R-1
Specifications
0

Overview

Mission Solar Energy is headquartered in San Antonio, Texas where we manufacture our modules, Mission Solar 395 Watt. We produce American, high-quality solar modules ensuring the highest-in-class power output and best-in-class reliability. Our product line is tailored for residential, commercial and utility applications. Every Mission Solar Energy solar module is certified and surpasses industry standard regulations, proving excellent performance over the long term.

HIGH-POWER OUTPUT

The MSE PERC 66 has the highest power output in its class. It is well suited for residential, commercial, and utility applications. It features PERC and nine busbar advanced technology driving 19.35% module efficiency. The MSE PERC 66 is Buy American Act and American Recovery and Reinvestment Act compliant.

GAIN MORE WITH PERC TECHNOLOGY

The PERC 66 features PERC technology which allows for more energy generation than traditional solar panels. With PERC, a “passivation layer” is added to the rear of the cell so light can be better captured throughout the cell. This layer also has reflective properties that allows light to bounce off the passivation layer and elsewhere into the cell. This produces additional energy (see illustration). The more power a module produces, the more money you save.

LONG-TERM RELIABILITY

Our modules offer an industry leading 25-year performance warranty independently backed by Powerguard’s third-party insurance and a 12-year product warranty. Mission Solar Energy is dedicated to quality, safety and reliability to ensure you get the very best.

PERC 66 ADVANTAGES

Certified Reliability - Tested to UL1703 & IEC standards. PID Resistant

Advanced Technology - PERC and 9 busbar drive >18% module efficiency. Ideal for all applications

Extreme Weather Resilience - 5631 Pa snow load (117 psf) tested load to UL1703. 185 mph wind rating*

BAA Compliant - Buy American Act and American Recovery & Reinvestment Act

Demand the best. Demand Mission Solar Energy.

Certified Reliability

Tested to UL 61730 & IEC Standards

PID resistant

Resistance to salt mist corrosion

Advanced Technology

9 Busbar

Passivated Emitter Rear Contact

Ideal for all applications

Extreme Weather Resilience

Up to 5,400 Pa front load & 3,600 Pa back load

Tested load to UL 61730 • 40 mm frame

BAA Compliant for Government Projects

Buy American Act

American Recovery & Reinvestment Act

Mission Solar 395 Watt Specifications

Solar Cells P-type mono-crystalline silicon

Cell Orientation 66 cells (6x11)

Module Dimension 1,907mm x 1,054mm x 40mm

Weight 48.5 lbs. (22 kg)

Front Glass 3.2mm tempered, low-iron, anti-reflective

Frame 40mm Anodized

Encapsulant Ethylene vinyl acetate (EVA)

Junction Box Protection class IP67 with 3 bypass-diodes

Cable 1.2m, Wire 4mm2 (12AWG)

Connector Staubli PV-KBT4/6II-UR and PV-KST4/6II-UR, MC4, Renhe 05-8

Maximum System Voltage 1,000Vdc

Operating Temperature Range -40°F to 185°F (-40°C to +85°C)

Maximum Series Fuse Rating 20A

Fire Safety Classification Type 1*

Front & Back Load (UL Standard) Up to 5,400 Pa front and 3,600 Pa back load, Tested to UL 61730

Hail Safety Impact Velocity 25mm at 23 m/s

Still have questions? Give us a call at 877-242-2792

What these specifications mean

Detailed specifications for Mission Solar 395 Watt PERC 66 Cell PV Solar Panel | MSE395SX9R have not been published yet. Mission Solar lists this solar panel in the Solar Panels, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a solar panel, the figures that matter most are open-circuit voltage (Voc) and short-circuit current (Isc) for string design, rated power in watt-peak (Wp) measured at standard test conditions, module efficiency, typically 19–23% on current products and cell technology — mono PERC, N-type TOPCon, HJT, or bifacial. Panels are the generating half of the system and the part that determines how much energy is available at all. They are also the longest-lived component, routinely still producing over 80% of their original output after 25 years.

Before you buy a solar panel

The checks below apply to any solar panel. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

  • Compare cost per watt rather than price per panel — a higher-wattage module is often cheaper per watt and needs fewer mounting rails, clamps and cable runs.
  • Prefer a lower (closer to zero) temperature coefficient in hot climates. Panels lose output as they heat up, and on a 45 °C roof the difference between −0.34 %/°C and −0.29 %/°C is real energy over a year.
  • Read both warranties. The product warranty (typically 12–15 years, up to 25 on premium modules) covers manufacturing defects; the separate performance warranty guarantees output — commonly 87–92% remaining at year 25.
  • Check the physical dimensions against your usable roof area before ordering. Modern modules are large, and a layout that works on paper can fail against obstructions, walkways and setback rules.

What people get wrong

  • Ignoring certification. IEC 61215 and IEC 61730 are the baseline; without them, warranty claims and grid approvals get complicated.
  • Buying the highest wattage available without checking the inverter's MPPT voltage window — a string that sits outside the window produces less, or nothing.
  • Assuming rated power is what you will see. Real-world output at midday is typically 75–85% of the nameplate figure after temperature, soiling, wiring and inverter losses.

Price and availability

Mission Solar 395 Watt PERC 66 Cell PV Solar Panel | MSE395SX9R is listed at $ 349 (USD). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Mission Solar locally before ordering.

Mission Solar 395 Watt PERC 66 Cell PV Solar Panel | MSE395SX9R — frequently asked questions

How much does Mission Solar 395 Watt PERC 66 Cell PV Solar Panel | MSE395SX9R cost?

Mission Solar 395 Watt PERC 66 Cell PV Solar Panel | MSE395SX9R is listed at $ 349 (USD). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes Mission Solar 395 Watt PERC 66 Cell PV Solar Panel | MSE395SX9R?

Mission Solar 395 Watt PERC 66 Cell PV Solar Panel | MSE395SX9R is a Mission Solar product, listed under solar panels with model reference MSE395SX9R-1. The Mission Solar brand page lists the rest of its range so you can compare across the catalogue.

Is Mission Solar 395 Watt PERC 66 Cell PV Solar Panel | MSE395SX9R right for my system?

That depends on what it has to connect to. For a solar panel, check physical dimensions and weight, which decide what fits your roof and mounting, open-circuit voltage (Voc) and short-circuit current (Isc) for string design and rated power in watt-peak (Wp) measured at standard test conditions against the rest of your equipment before price enters the decision. Check the physical dimensions against your usable roof area before ordering. Modern modules are large, and a layout that works on paper can fail against obstructions, walkways and setback rules.

Where can I buy Mission Solar 395 Watt PERC 66 Cell PV Solar Panel | MSE395SX9R?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.

Write a Review

Share your experience — no account needed.

Your rating *

Related Products