Solar Panels

250W | Hard Frame Solar Panel | 22V

A$ 299AUD · price may vary

Model: SP250
Specifications: 0

Overview

Our 22V 250W Hard Frame Solar Panels are proudly designed and developed in Australia. Utilising advanced HPX PRO Technology, these panels deliver exceptional power output and durability to meet even the most demanding energy needs. Engineered with precision, these panels set a new standard in reliable energy performance and build quality.

Designed locally to uphold the highest standards and tailored specifically for Australian conditions, these panels incorporate cutting-edge technology that maximises power efficiency and minimises energy loss, even under shade and less-than-ideal weather conditions.

Constructed with reinforced materials, they provide enhanced durability and a sleek, modern aesthetic that integrates seamlessly with caravans, 4WD vehicles, and other outdoor applications.

Whether you’re exploring off the beaten track or need dependable power for your system, the 22V 250W Hard Frame Solar Panels are your trusted energy partner, delivering consistent, high-performance output wherever you venture.

For secure and straightforward installation, mounting brackets are available separately.

What these specifications mean

Detailed specifications for 250W | Hard Frame Solar Panel | 22V have not been published yet. iTechworld lists this solar panel in the Solar Panels, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a solar panel, the figures that matter most are open-circuit voltage (Voc) and short-circuit current (Isc) for string design, rated power in watt-peak (Wp) measured at standard test conditions, module efficiency, typically 19–23% on current products and cell technology — mono PERC, N-type TOPCon, HJT, or bifacial. Panels are the generating half of the system and the part that determines how much energy is available at all. They are also the longest-lived component, routinely still producing over 80% of their original output after 25 years.

Before you buy a solar panel

The checks below apply to any solar panel. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Compare cost per watt rather than price per panel — a higher-wattage module is often cheaper per watt and needs fewer mounting rails, clamps and cable runs.
Prefer a lower (closer to zero) temperature coefficient in hot climates. Panels lose output as they heat up, and on a 45 °C roof the difference between −0.34 %/°C and −0.29 %/°C is real energy over a year.
Read both warranties. The product warranty (typically 12–15 years, up to 25 on premium modules) covers manufacturing defects; the separate performance warranty guarantees output — commonly 87–92% remaining at year 25.
Check the physical dimensions against your usable roof area before ordering. Modern modules are large, and a layout that works on paper can fail against obstructions, walkways and setback rules.

Common mistakes

Assuming rated power is what you will see. Real-world output at midday is typically 75–85% of the nameplate figure after temperature, soiling, wiring and inverter losses.
Underestimating shade. A single shaded cell can suppress an entire string unless you use module-level optimisers or microinverters.
Ignoring certification. IEC 61215 and IEC 61730 are the baseline; without them, warranty claims and grid approvals get complicated.

Price and availability

250W | Hard Frame Solar Panel | 22V is listed at A$ 299 (AUD). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports iTechworld locally before ordering.

250W | Hard Frame Solar Panel | 22V — frequently asked questions

How much does 250W | Hard Frame Solar Panel | 22V cost?

250W | Hard Frame Solar Panel | 22V is listed at A$ 299 (AUD). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes 250W | Hard Frame Solar Panel | 22V?

250W | Hard Frame Solar Panel | 22V is a iTechworld product, listed under solar panels with model reference SP250. The iTechworld brand page lists the rest of its range so you can compare across the catalogue.

Is 250W | Hard Frame Solar Panel | 22V right for my system?

That depends on what it has to connect to. For a solar panel, check rated power in watt-peak (Wp) measured at standard test conditions, module efficiency, typically 19–23% on current products and cell technology — mono PERC, N-type TOPCon, HJT, or bifacial against the rest of your equipment before price enters the decision. Prefer a lower (closer to zero) temperature coefficient in hot climates. Panels lose output as they heat up, and on a 45 °C roof the difference between −0.34 %/°C and −0.29 %/°C is real energy over a year.

Where can I buy 250W | Hard Frame Solar Panel | 22V?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.