Inverters
Inverters
BrandTesla Solar
Tesla HSC 10kW IP65 Hybrid Solar Inverter
₨ 440,000PKR · price may vary
BrandTesla Solar- Model
- TESA-92
- Specifications
- 12
- Efficiency98.1
- Input Current18.5 x 3
- Input Power15
- Discharge Current240
- MPPT Range130 - 500
- View all 12 specifications ↓
Specifications
| HARDWARE FEATURES | |
|---|---|
| Efficiency | 98.1 |
| Input Current | 18.5 x 3 |
| Input Power | 15 |
| TECHNICAL SPECIFICATION | |
| Discharge Current | 240 |
| MPPT Range | 130 - 500 |
| General Specification | |
| Dimensions | 785 x 614 x 258 |
| Discharge power | 10 |
| Normal Voltage | 360 |
| Short Current | 26 x 3 |
| Startup voltage | 100 |
| Voltage | 550 |
| Weight | 43 kg |
Reading the specifications
Tesla HSC 10kW IP65 Hybrid Solar Inverter is listed with 12 published specifications from Tesla Solar, including efficiency of 98.1, input current of 18.5 x 3, input power of 15 and discharge current of 240. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.
For an inverter, the figures that matter most are continuous AC output in kW, which caps the load you can run at once, surge or peak rating, which covers the brief inrush of motors and compressors, maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect and the MPPT voltage window, which decides how many panels go in a string. It is the component that decides what a solar system can do: how much power you can draw at once, whether you can export to the grid, whether the system keeps running in a blackout, and how well the panels and battery are managed day to day.
An inverter converts the direct current (DC) produced by solar panels and stored in batteries into the alternating current (AC) that household appliances, pumps and the utility grid actually use.
What to check before ordering
The checks below apply to any inverter. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Check the surge rating if you run motors — deep-well pumps, compressors and older air conditioners can draw two to three times their running current for a few seconds at start-up.
- Choose a hybrid inverter if a battery is in your plan now or later; retrofitting storage onto a pure grid-tie inverter usually means buying a second unit or an AC-coupled battery system.
- Confirm the inverter is approved by your local utility or distribution network before you buy if you intend to export power — grid connection depends on certified anti-islanding and local grid-code compliance, not on the inverter's specifications alone.
- Match the battery communication protocol (CAN bus or RS485) between inverter and battery. Compatible voltages are not enough; without a supported protocol the battery management system and inverter cannot agree on charge limits.
Common mistakes
- Assuming any grid-tie inverter keeps the lights on during an outage. Standard on-grid units shut down for safety unless they have a dedicated backup or islanding output.
- Overlooking the IP rating. An outdoor installation needs at least IP65; indoor-rated units mounted outside fail early.
- Buying on peak-watt price alone. A cheap inverter with a narrow MPPT window forces awkward string layouts and can strand a portion of the array.
Price and availability
Tesla HSC 10kW IP65 Hybrid Solar Inverter is listed at ₨ 440,000 (PKR). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Tesla Solar locally before ordering.
Tesla HSC 10kW IP65 Hybrid Solar Inverter — frequently asked questions
How much does Tesla HSC 10kW IP65 Hybrid Solar Inverter cost?
Tesla HSC 10kW IP65 Hybrid Solar Inverter is listed at ₨ 440,000 (PKR). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.
What are the specifications of Tesla HSC 10kW IP65 Hybrid Solar Inverter?
We hold 12 published specifications for this inverter, including efficiency 98.1, input current 18.5 x 3, input power 15, discharge current 240 and MPPT range 130 - 500. The full table is on this page, listed under model TESA-92.
Who makes Tesla HSC 10kW IP65 Hybrid Solar Inverter?
Tesla HSC 10kW IP65 Hybrid Solar Inverter is a Tesla Solar product, listed under inverters with model reference TESA-92. The Tesla Solar brand page lists the rest of its range so you can compare across the catalogue.
Is Tesla HSC 10kW IP65 Hybrid Solar Inverter right for my system?
That depends on what it has to connect to. For an inverter, check maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect, the MPPT voltage window, which decides how many panels go in a string and peak and weighted (European/CEC) efficiency, typically 96–98.5% against the rest of your equipment before price enters the decision. Choose a hybrid inverter if a battery is in your plan now or later; retrofitting storage onto a pure grid-tie inverter usually means buying a second unit or an AC-coupled battery system.
Where can I buy Tesla HSC 10kW IP65 Hybrid Solar Inverter?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.
