Inverters
Inverters
BrandSMA
SMA Sunny Island 6.0H/8.0H Communication Interfaces
£ 128.8GBP · price may vary
BrandSMA- Model
- SI-SYSCAN-NR
- Specifications
- 1
- Weight (kg)2
Overview
Communication interfaces for the SMA Sunny Island 6.0H/8.0H battery inverter/chargers.
Specifications
| Weight (kg) | 2 |
|---|
How to read this datasheet
SMA Sunny Island 6.0H/8.0H Communication Interfaces is listed with 1 published specification from SMA, including weight (kg) of 2. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.
For an inverter, the figures that matter most are maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect, the MPPT voltage window, which decides how many panels go in a string, peak and weighted (European/CEC) efficiency, typically 96–98.5% and topology — on-grid, off-grid, hybrid or micro. It is the component that decides what a solar system can do: how much power you can draw at once, whether you can export to the grid, whether the system keeps running in a blackout, and how well the panels and battery are managed day to day.
What to check before ordering
The checks below apply to any inverter. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Size the inverter against the loads you need to run simultaneously, not against the total wattage of every appliance in the building — a 5 kW inverter comfortably runs a fridge, fans, lights and a couple of ACs, but not all of them plus a water pump starting at the same time.
- Keep the panel array between roughly 1.0 and 1.3 times the inverter's rating. Slight oversizing (a higher DC-to-AC ratio) captures more energy on cloudy mornings and winter days; going far beyond it wastes generation through clipping.
- Check the surge rating if you run motors — deep-well pumps, compressors and older air conditioners can draw two to three times their running current for a few seconds at start-up.
- Choose a hybrid inverter if a battery is in your plan now or later; retrofitting storage onto a pure grid-tie inverter usually means buying a second unit or an AC-coupled battery system.
Common mistakes
- Assuming any grid-tie inverter keeps the lights on during an outage. Standard on-grid units shut down for safety unless they have a dedicated backup or islanding output.
- Overlooking the IP rating. An outdoor installation needs at least IP65; indoor-rated units mounted outside fail early.
- Buying on peak-watt price alone. A cheap inverter with a narrow MPPT window forces awkward string layouts and can strand a portion of the array.
Price and availability
SMA Sunny Island 6.0H/8.0H Communication Interfaces is listed at £ 129 (GBP). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports SMA locally before ordering.
SMA Sunny Island 6.0H/8.0H Communication Interfaces — frequently asked questions
How much does SMA Sunny Island 6.0H/8.0H Communication Interfaces cost?
SMA Sunny Island 6.0H/8.0H Communication Interfaces is listed at £ 129 (GBP). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.
What are the specifications of SMA Sunny Island 6.0H/8.0H Communication Interfaces?
We hold 1 published specification for this inverter, including weight (kg) 2. The full table is on this page, listed under model SI-SYSCAN-NR.
Who makes SMA Sunny Island 6.0H/8.0H Communication Interfaces?
SMA Sunny Island 6.0H/8.0H Communication Interfaces is a SMA product, listed under inverters with model reference SI-SYSCAN-NR. The SMA brand page lists the rest of its range so you can compare across the catalogue.
Is SMA Sunny Island 6.0H/8.0H Communication Interfaces right for my system?
That depends on what it has to connect to. For an inverter, check peak and weighted (European/CEC) efficiency, typically 96–98.5%, topology — on-grid, off-grid, hybrid or micro and continuous AC output in kW, which caps the load you can run at once against the rest of your equipment before price enters the decision. Check the surge rating if you run motors — deep-well pumps, compressors and older air conditioners can draw two to three times their running current for a few seconds at start-up.
Where can I buy SMA Sunny Island 6.0H/8.0H Communication Interfaces?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.
