Inverters

SolarEdge S-Series Commercial Power Optimisers

£ 56.17GBP · price may vary

Model: SES1000-1GM4MBT
Specifications: 0

Reading the specifications

Detailed specifications for SolarEdge S-Series Commercial Power Optimisers have not been published yet. SolarEdge lists this inverter in the Inverters, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For an inverter, the figures that matter most are continuous AC output in kW, which caps the load you can run at once, surge or peak rating, which covers the brief inrush of motors and compressors, maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect and the MPPT voltage window, which decides how many panels go in a string. It is the component that decides what a solar system can do: how much power you can draw at once, whether you can export to the grid, whether the system keeps running in a blackout, and how well the panels and battery are managed day to day.

An inverter converts the direct current (DC) produced by solar panels and stored in batteries into the alternating current (AC) that household appliances, pumps and the utility grid actually use.

Choosing an inverter: the checks that matter

The checks below apply to any inverter. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Size the inverter against the loads you need to run simultaneously, not against the total wattage of every appliance in the building — a 5 kW inverter comfortably runs a fridge, fans, lights and a couple of ACs, but not all of them plus a water pump starting at the same time.
Keep the panel array between roughly 1.0 and 1.3 times the inverter's rating. Slight oversizing (a higher DC-to-AC ratio) captures more energy on cloudy mornings and winter days; going far beyond it wastes generation through clipping.
Check the surge rating if you run motors — deep-well pumps, compressors and older air conditioners can draw two to three times their running current for a few seconds at start-up.
Choose a hybrid inverter if a battery is in your plan now or later; retrofitting storage onto a pure grid-tie inverter usually means buying a second unit or an AC-coupled battery system.

Common mistakes

Assuming any grid-tie inverter keeps the lights on during an outage. Standard on-grid units shut down for safety unless they have a dedicated backup or islanding output.
Overlooking the IP rating. An outdoor installation needs at least IP65; indoor-rated units mounted outside fail early.
Buying on peak-watt price alone. A cheap inverter with a narrow MPPT window forces awkward string layouts and can strand a portion of the array.

Price and availability

SolarEdge S-Series Commercial Power Optimisers is listed at £ 56 (GBP). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports SolarEdge locally before ordering.

SolarEdge S-Series Commercial Power Optimisers — frequently asked questions

How much does SolarEdge S-Series Commercial Power Optimisers cost?

SolarEdge S-Series Commercial Power Optimisers is listed at £ 56 (GBP). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes SolarEdge S-Series Commercial Power Optimisers?

SolarEdge S-Series Commercial Power Optimisers is a SolarEdge product, listed under inverters with model reference SES1000-1GM4MBT. The SolarEdge brand page lists the rest of its range so you can compare across the catalogue.

Is SolarEdge S-Series Commercial Power Optimisers right for my system?

That depends on what it has to connect to. For an inverter, check continuous AC output in kW, which caps the load you can run at once, surge or peak rating, which covers the brief inrush of motors and compressors and maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect against the rest of your equipment before price enters the decision. Keep the panel array between roughly 1.0 and 1.3 times the inverter's rating. Slight oversizing (a higher DC-to-AC ratio) captures more energy on cloudy mornings and winter days; going far beyond it wastes generation through clipping.

Where can I buy SolarEdge S-Series Commercial Power Optimisers?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.