Inverters

SAJ H2 LV 10kW IP65 Hybrid Solar Inverter

₨ 335,000PKR · price may vary

Model: WSAJ-11
Specifications: 6

DC Input Voltage550V to 1,000V DC
Input Current16A to 20A
MPPT Voltage Range180V – 900V DC
PV Power15,000
Start-up Voltage150V – 180V DC.
View all 6 specifications ↓

Overview

The SAJ 10kW Hybrid Inverter (predominantly the SAJ H2 Low Voltage Series) is a highly versatile residential and light commercial solar solution. It optimizes energy self-consumption, manages battery storage, and ensures reliable whole-home backup power during grid failures.Features:

Specifications

Voltage DC
DC Input Voltage	550V to 1,000V DC
HARDWARE FEATURES
Input Current	16A to 20A
TECHNICAL SPECIFICATION
MPPT Voltage Range	180V – 900V DC
PV Power	15,000
Start-up Voltage	150V – 180V DC.
General Specification
MPPT	Dual (2) MPPT trackers.

What these specifications mean

SAJ H2 LV 10kW IP65 Hybrid Solar Inverter is listed with 6 published specifications from SAJ, including DC input voltage of 550V to 1,000V DC, input current of 16A to 20A, MPPT voltage range of 180V – 900V DC and PV power of 15,000. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.

For an inverter, the figures that matter most are surge or peak rating, which covers the brief inrush of motors and compressors, maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect, the MPPT voltage window, which decides how many panels go in a string and peak and weighted (European/CEC) efficiency, typically 96–98.5%. It is the component that decides what a solar system can do: how much power you can draw at once, whether you can export to the grid, whether the system keeps running in a blackout, and how well the panels and battery are managed day to day.

What to check before ordering

The checks below apply to any inverter. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Match the battery communication protocol (CAN bus or RS485) between inverter and battery. Compatible voltages are not enough; without a supported protocol the battery management system and inverter cannot agree on charge limits.
Look at the warranty term and what it covers. Five years is the common baseline, ten is offered by stronger brands, and extensions are often cheaper bought with the unit than later.
Size the inverter against the loads you need to run simultaneously, not against the total wattage of every appliance in the building — a 5 kW inverter comfortably runs a fridge, fans, lights and a couple of ACs, but not all of them plus a water pump starting at the same time.
Keep the panel array between roughly 1.0 and 1.3 times the inverter's rating. Slight oversizing (a higher DC-to-AC ratio) captures more energy on cloudy mornings and winter days; going far beyond it wastes generation through clipping.

Where buyers lose money

Overlooking the IP rating. An outdoor installation needs at least IP65; indoor-rated units mounted outside fail early.
Buying on peak-watt price alone. A cheap inverter with a narrow MPPT window forces awkward string layouts and can strand a portion of the array.
Ignoring the ambient temperature rating. Inverters derate in heat, so a unit rated 5 kW at 25 °C may deliver noticeably less on a hot roof-adjacent wall at 45 °C.

Price and availability

SAJ H2 LV 10kW IP65 Hybrid Solar Inverter is listed at ₨ 335,000 (PKR). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports SAJ locally before ordering.

SAJ H2 LV 10kW IP65 Hybrid Solar Inverter — frequently asked questions

How much does SAJ H2 LV 10kW IP65 Hybrid Solar Inverter cost?

SAJ H2 LV 10kW IP65 Hybrid Solar Inverter is listed at ₨ 335,000 (PKR). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

What are the specifications of SAJ H2 LV 10kW IP65 Hybrid Solar Inverter?

We hold 6 published specifications for this inverter, including DC input voltage 550V to 1,000V DC, input current 16A to 20A, MPPT voltage range 180V – 900V DC, PV power 15,000 and start-up voltage 150V – 180V DC.. The full table is on this page, listed under model WSAJ-11.

Who makes SAJ H2 LV 10kW IP65 Hybrid Solar Inverter?

SAJ H2 LV 10kW IP65 Hybrid Solar Inverter is a SAJ product, listed under inverters with model reference WSAJ-11. The SAJ brand page lists the rest of its range so you can compare across the catalogue.

Is SAJ H2 LV 10kW IP65 Hybrid Solar Inverter right for my system?

That depends on what it has to connect to. For an inverter, check topology — on-grid, off-grid, hybrid or micro, continuous AC output in kW, which caps the load you can run at once and surge or peak rating, which covers the brief inrush of motors and compressors against the rest of your equipment before price enters the decision. Confirm the inverter is approved by your local utility or distribution network before you buy if you intend to export power — grid connection depends on certified anti-islanding and local grid-code compliance, not on the inverter's specifications alone.

Where can I buy SAJ H2 LV 10kW IP65 Hybrid Solar Inverter?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.