Inverters
Inverters
ONYX 3.6KW Smart Hybrid Inverter SM-3.6K-H1P
₨ 260,000PKR · price may vary
BrandOnyx Solar Inverter- Model
- ONYR-01
- Specifications
- 3
- MPPT Efficiency99.9%
- Operating Temperature-25~60 C
- PV Input Range100~500VDC
Overview
OVERVIEW:3.6KW Smart Hybrid Inverter 3 in 1 (Grid Tied/Hybrid/Off-Grid)Model: SM-3.6K-H1PArtificial Intelligence & IOT Colour LCD Touch Screen & Buttons:Easy to ControlIntelligent Cooling, IP65 ProtectionMPPT Efficiency 99.9%Pure Sine waveHigh ReliabilityHigh Power FactorHig
Specifications
| General Specification | |
|---|---|
| MPPT Efficiency | 99.9% |
| Operating Temperature | -25~60 C |
| PV Input Range | 100~500VDC |
How to read this datasheet
ONYX 3.6KW Smart Hybrid Inverter SM-3.6K-H1P is listed with 3 published specifications from Onyx Solar Inverter, including MPPT efficiency of 99.9%, operating temperature of -25~60 C and PV input range of 100~500VDC. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.
For an inverter, the figures that matter most are topology — on-grid, off-grid, hybrid or micro, continuous AC output in kW, which caps the load you can run at once, surge or peak rating, which covers the brief inrush of motors and compressors and maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect. It is the component that decides what a solar system can do: how much power you can draw at once, whether you can export to the grid, whether the system keeps running in a blackout, and how well the panels and battery are managed day to day.
Choosing an inverter: the checks that matter
The checks below apply to any inverter. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Size the inverter against the loads you need to run simultaneously, not against the total wattage of every appliance in the building — a 5 kW inverter comfortably runs a fridge, fans, lights and a couple of ACs, but not all of them plus a water pump starting at the same time.
- Keep the panel array between roughly 1.0 and 1.3 times the inverter's rating. Slight oversizing (a higher DC-to-AC ratio) captures more energy on cloudy mornings and winter days; going far beyond it wastes generation through clipping.
- Check the surge rating if you run motors — deep-well pumps, compressors and older air conditioners can draw two to three times their running current for a few seconds at start-up.
- Choose a hybrid inverter if a battery is in your plan now or later; retrofitting storage onto a pure grid-tie inverter usually means buying a second unit or an AC-coupled battery system.
Where buyers lose money
- Ignoring the ambient temperature rating. Inverters derate in heat, so a unit rated 5 kW at 25 °C may deliver noticeably less on a hot roof-adjacent wall at 45 °C.
- Assuming any grid-tie inverter keeps the lights on during an outage. Standard on-grid units shut down for safety unless they have a dedicated backup or islanding output.
- Overlooking the IP rating. An outdoor installation needs at least IP65; indoor-rated units mounted outside fail early.
Price and availability
ONYX 3.6KW Smart Hybrid Inverter SM-3.6K-H1P is listed at ₨ 260,000 (PKR). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Onyx Solar Inverter locally before ordering.
ONYX 3.6KW Smart Hybrid Inverter SM-3.6K-H1P — frequently asked questions
How much does ONYX 3.6KW Smart Hybrid Inverter SM-3.6K-H1P cost?
ONYX 3.6KW Smart Hybrid Inverter SM-3.6K-H1P is listed at ₨ 260,000 (PKR). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.
What are the specifications of ONYX 3.6KW Smart Hybrid Inverter SM-3.6K-H1P?
We hold 3 published specifications for this inverter, including MPPT efficiency 99.9%, operating temperature -25~60 C and PV input range 100~500VDC. The full table is on this page, listed under model ONYR-01.
Who makes ONYX 3.6KW Smart Hybrid Inverter SM-3.6K-H1P?
ONYX 3.6KW Smart Hybrid Inverter SM-3.6K-H1P is a Onyx Solar Inverter product, listed under inverters with model reference ONYR-01. The Onyx Solar Inverter brand page lists the rest of its range so you can compare across the catalogue.
Is ONYX 3.6KW Smart Hybrid Inverter SM-3.6K-H1P right for my system?
That depends on what it has to connect to. For an inverter, check the MPPT voltage window, which decides how many panels go in a string, peak and weighted (European/CEC) efficiency, typically 96–98.5% and topology — on-grid, off-grid, hybrid or micro against the rest of your equipment before price enters the decision. Check the surge rating if you run motors — deep-well pumps, compressors and older air conditioners can draw two to three times their running current for a few seconds at start-up.
Where can I buy ONYX 3.6KW Smart Hybrid Inverter SM-3.6K-H1P?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.
