Inverters

Knox Xerox 10.2kW On Grid Solar Inverter

₨ 169,000PKR · price may vary

Model: KNOX-58
Specifications: 7

Voltage range150V to 1000V
Degree of protectionIP66
Array Power17000Wp
Nominal voltage230, 3/N/PE
Rated Power12000W
View all 7 specifications ↓

Overview

Overview:The Xerox G4 Pro 10.2K Inverter is our line of benchmark three phase solar inverters designed for use in small decentralized residential, commercial, and industrial systems. These high-performance and high-delivery inverters are extremely easy to install and commission and are designed

Specifications

Summary
Voltage range	150V to 1000V
HARDWARE FEATURES
Degree of protection	IP66
TECHNICAL SPECIFICATION
Array Power	17000Wp
Nominal voltage	230, 3/N/PE
Rated Power	12000W
General Specification
Current	48A / 30A
Input Voltage	630V

Reading the specifications

Knox Xerox 10.2kW On Grid Solar Inverter is listed with 7 published specifications from Knox, including voltage range of 150V to 1000V, degree of protection of IP66, array power of 17000Wp and nominal voltage of 230, 3/N/PE. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.

For an inverter, the figures that matter most are continuous AC output in kW, which caps the load you can run at once, surge or peak rating, which covers the brief inrush of motors and compressors, maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect and the MPPT voltage window, which decides how many panels go in a string. It is the component that decides what a solar system can do: how much power you can draw at once, whether you can export to the grid, whether the system keeps running in a blackout, and how well the panels and battery are managed day to day.

What to check before ordering

The checks below apply to any inverter. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Match the battery communication protocol (CAN bus or RS485) between inverter and battery. Compatible voltages are not enough; without a supported protocol the battery management system and inverter cannot agree on charge limits.
Look at the warranty term and what it covers. Five years is the common baseline, ten is offered by stronger brands, and extensions are often cheaper bought with the unit than later.
Size the inverter against the loads you need to run simultaneously, not against the total wattage of every appliance in the building — a 5 kW inverter comfortably runs a fridge, fans, lights and a couple of ACs, but not all of them plus a water pump starting at the same time.
Keep the panel array between roughly 1.0 and 1.3 times the inverter's rating. Slight oversizing (a higher DC-to-AC ratio) captures more energy on cloudy mornings and winter days; going far beyond it wastes generation through clipping.

Where buyers lose money

Assuming any grid-tie inverter keeps the lights on during an outage. Standard on-grid units shut down for safety unless they have a dedicated backup or islanding output.
Overlooking the IP rating. An outdoor installation needs at least IP65; indoor-rated units mounted outside fail early.
Buying on peak-watt price alone. A cheap inverter with a narrow MPPT window forces awkward string layouts and can strand a portion of the array.

Price and availability

Knox Xerox 10.2kW On Grid Solar Inverter is listed at ₨ 169,000 (PKR). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Knox locally before ordering.

Knox Xerox 10.2kW On Grid Solar Inverter — frequently asked questions

How much does Knox Xerox 10.2kW On Grid Solar Inverter cost?

Knox Xerox 10.2kW On Grid Solar Inverter is listed at ₨ 169,000 (PKR). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

What are the specifications of Knox Xerox 10.2kW On Grid Solar Inverter?

We hold 7 published specifications for this inverter, including voltage range 150V to 1000V, degree of protection IP66, array power 17000Wp, nominal voltage 230, 3/N/PE and rated power 12000W. The full table is on this page, listed under model KNOX-58.

Who makes Knox Xerox 10.2kW On Grid Solar Inverter?

Knox Xerox 10.2kW On Grid Solar Inverter is a Knox product, listed under inverters with model reference KNOX-58. The Knox brand page lists the rest of its range so you can compare across the catalogue.

Is Knox Xerox 10.2kW On Grid Solar Inverter right for my system?

That depends on what it has to connect to. For an inverter, check maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect, the MPPT voltage window, which decides how many panels go in a string and peak and weighted (European/CEC) efficiency, typically 96–98.5% against the rest of your equipment before price enters the decision. Match the battery communication protocol (CAN bus or RS485) between inverter and battery. Compatible voltages are not enough; without a supported protocol the battery management system and inverter cannot agree on charge limits.

Where can I buy Knox Xerox 10.2kW On Grid Solar Inverter?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.