Inverters
Inverters
Knox XENON 8kW IP66 PV11000W Hybrid Solar Inverter
BrandKnox- Model
- KNOX-19
- Specifications
- 17
- Transfer Time10 ms (For Personal Computers), 20 ms (For Home Appliances)
- Battery Voltage48 VDC
- Floating Charge Voltage54 VDC
- Rated Power8000VA/8000W
- Selectable Voltage Range170-280 VAC (For Computers) 90-280 VAC (For Home Appliances)
- View all 17 specifications ↓
Overview
Easy-to-Install:IP66 waterproof and dustproof makes the inverter available for various working conditions.Dual outputs, for smart load management.Reserved communication port for BMS (RS485, CAN-BUS or RS232).Reliable:Replaceable fan design for ease of maintenance.Battery independent design.Congurabl
Specifications
| Output | |
|---|---|
| Transfer Time | 10 ms (For Personal Computers), 20 ms (For Home Appliances) |
| TECHNICAL SPECIFICATION | |
| Battery Voltage | 48 VDC |
| Floating Charge Voltage | 54 VDC |
| Rated Power | 8000VA/8000W |
| Selectable Voltage Range | 170-280 VAC (For Computers) 90-280 VAC (For Home Appliances) |
| Surge Power | 16000VA |
| General Specification | |
| AC Voltage Regulation | 230VAC ± 5% |
| Frequency Range | 50 Hz/60 Hz (Auto sensing) |
| Maximum PV Array Power | 8000W (4000W x 2) |
| Net Weight | 32Kgs |
| Operating Temperature | -10℃ to 50℃ |
| Parallel Capability | YES, 6 Units |
| Solar Charger Type | MPPT |
| Type | Hybrid Solar Inverter |
| Voltage | 230 VAC |
| Waveform | Pure sine wave |
| Dimension | 210 x 435 x 665mm |
How to read this datasheet
Knox XENON 8kW IP66 PV11000W Hybrid Solar Inverter is listed with 17 published specifications from Knox, including transfer time of 10 ms (For Personal Computers), 20 ms (For Home Appliances), battery voltage of 48 VDC, floating charge voltage of 54 VDC and rated power of 8000VA/8000W. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.
For an inverter, the figures that matter most are maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect, the MPPT voltage window, which decides how many panels go in a string, peak and weighted (European/CEC) efficiency, typically 96–98.5% and topology — on-grid, off-grid, hybrid or micro. It is the component that decides what a solar system can do: how much power you can draw at once, whether you can export to the grid, whether the system keeps running in a blackout, and how well the panels and battery are managed day to day.
What to check before ordering
The checks below apply to any inverter. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Confirm the inverter is approved by your local utility or distribution network before you buy if you intend to export power — grid connection depends on certified anti-islanding and local grid-code compliance, not on the inverter's specifications alone.
- Match the battery communication protocol (CAN bus or RS485) between inverter and battery. Compatible voltages are not enough; without a supported protocol the battery management system and inverter cannot agree on charge limits.
- Look at the warranty term and what it covers. Five years is the common baseline, ten is offered by stronger brands, and extensions are often cheaper bought with the unit than later.
- Size the inverter against the loads you need to run simultaneously, not against the total wattage of every appliance in the building — a 5 kW inverter comfortably runs a fridge, fans, lights and a couple of ACs, but not all of them plus a water pump starting at the same time.
Common mistakes
- Buying on peak-watt price alone. A cheap inverter with a narrow MPPT window forces awkward string layouts and can strand a portion of the array.
- Ignoring the ambient temperature rating. Inverters derate in heat, so a unit rated 5 kW at 25 °C may deliver noticeably less on a hot roof-adjacent wall at 45 °C.
- Assuming any grid-tie inverter keeps the lights on during an outage. Standard on-grid units shut down for safety unless they have a dedicated backup or islanding output.
Price and availability
No price is published for Knox XENON 8kW IP66 PV11000W Hybrid Solar Inverter at the moment. Pricing on solar equipment moves with supply and exchange rates, and some distributors quote only on request — the specifications above are still directly comparable against alternatives that do list a price.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Knox locally before ordering.
Knox XENON 8kW IP66 PV11000W Hybrid Solar Inverter — frequently asked questions
What are the specifications of Knox XENON 8kW IP66 PV11000W Hybrid Solar Inverter?
We hold 17 published specifications for this inverter, including transfer time 10 ms (For Personal Computers), 20 ms (For Home Appliances), battery voltage 48 VDC, floating charge voltage 54 VDC, rated power 8000VA/8000W and selectable voltage range 170-280 VAC (For Computers) 90-280 VAC (For Home Appliances). The full table is on this page, listed under model KNOX-19.
Who makes Knox XENON 8kW IP66 PV11000W Hybrid Solar Inverter?
Knox XENON 8kW IP66 PV11000W Hybrid Solar Inverter is a Knox product, listed under inverters with model reference KNOX-19. The Knox brand page lists the rest of its range so you can compare across the catalogue.
Is Knox XENON 8kW IP66 PV11000W Hybrid Solar Inverter right for my system?
That depends on what it has to connect to. For an inverter, check continuous AC output in kW, which caps the load you can run at once, surge or peak rating, which covers the brief inrush of motors and compressors and maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect against the rest of your equipment before price enters the decision. Choose a hybrid inverter if a battery is in your plan now or later; retrofitting storage onto a pure grid-tie inverter usually means buying a second unit or an AC-coupled battery system.
Where can I buy Knox XENON 8kW IP66 PV11000W Hybrid Solar Inverter?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.
