Inverters

Hopewind 250kW On Grid Solar Inverter

Model: HOPD-19
Specifications: 15

DisplayLED Indicator
Power Factor>0.99 (0.8 leading ~ 0.8 lagging)
TopologyTransformerless
Protection degreeIP66
Starting Voltage500V
View all 15 specifications ↓

Overview

OVERVIEW:High-Efficiency:12 MPPTs with Max. efficiency 99.01%.Compatible with 500Wp + bifacial modules.Highly-precise intelligent string detection.Reliability:Built-in Type ӀӀ DC&AC SPD.Built-in PID recovery function (optional).Compatible in harsh environmental conditions.User Friendly:Active an

Specifications

Display Specification
Display	LED Indicator
Summary
Power Factor	>0.99 (0.8 leading ~ 0.8 lagging)
Output
Topology	Transformerless
TECHNICAL SPECIFICATION
Protection degree	IP66
Starting Voltage	500V
General Specification
Communication	RS485 / PLC
Cooling System	Smart Air Cooling
Max Input Voltage	1500V
Maximum PV Input Power	375kW
Phase	Three Phase
Rated Output Power	250kW
Surge Protection	DC type II / AC type III
Type	On Grid Solar Inverter
Weight	≤115kg
Dimensions	1090809337.5mm

How to read this datasheet

Hopewind 250kW On Grid Solar Inverter is listed with 15 published specifications from Hopewind, including display of LED Indicator, power factor of >0.99 (0.8 leading ~ 0.8 lagging), topology of Transformerless and protection degree of IP66. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.

For an inverter, the figures that matter most are maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect, the MPPT voltage window, which decides how many panels go in a string, peak and weighted (European/CEC) efficiency, typically 96–98.5% and topology — on-grid, off-grid, hybrid or micro. It is the component that decides what a solar system can do: how much power you can draw at once, whether you can export to the grid, whether the system keeps running in a blackout, and how well the panels and battery are managed day to day.

What to check before ordering

The checks below apply to any inverter. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Match the battery communication protocol (CAN bus or RS485) between inverter and battery. Compatible voltages are not enough; without a supported protocol the battery management system and inverter cannot agree on charge limits.
Look at the warranty term and what it covers. Five years is the common baseline, ten is offered by stronger brands, and extensions are often cheaper bought with the unit than later.
Size the inverter against the loads you need to run simultaneously, not against the total wattage of every appliance in the building — a 5 kW inverter comfortably runs a fridge, fans, lights and a couple of ACs, but not all of them plus a water pump starting at the same time.
Keep the panel array between roughly 1.0 and 1.3 times the inverter's rating. Slight oversizing (a higher DC-to-AC ratio) captures more energy on cloudy mornings and winter days; going far beyond it wastes generation through clipping.

Where buyers lose money

Buying on peak-watt price alone. A cheap inverter with a narrow MPPT window forces awkward string layouts and can strand a portion of the array.
Ignoring the ambient temperature rating. Inverters derate in heat, so a unit rated 5 kW at 25 °C may deliver noticeably less on a hot roof-adjacent wall at 45 °C.
Assuming any grid-tie inverter keeps the lights on during an outage. Standard on-grid units shut down for safety unless they have a dedicated backup or islanding output.

Price and availability

No price is published for Hopewind 250kW On Grid Solar Inverter at the moment. Pricing on solar equipment moves with supply and exchange rates, and some distributors quote only on request — the specifications above are still directly comparable against alternatives that do list a price.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Hopewind locally before ordering.

Hopewind 250kW On Grid Solar Inverter — frequently asked questions

What are the specifications of Hopewind 250kW On Grid Solar Inverter?

We hold 15 published specifications for this inverter, including display LED Indicator, power factor >0.99 (0.8 leading ~ 0.8 lagging), topology Transformerless, protection degree IP66 and starting voltage 500V. The full table is on this page, listed under model HOPD-19.

Who makes Hopewind 250kW On Grid Solar Inverter?

Hopewind 250kW On Grid Solar Inverter is a Hopewind product, listed under inverters with model reference HOPD-19. The Hopewind brand page lists the rest of its range so you can compare across the catalogue.

Is Hopewind 250kW On Grid Solar Inverter right for my system?

That depends on what it has to connect to. For an inverter, check maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect, the MPPT voltage window, which decides how many panels go in a string and peak and weighted (European/CEC) efficiency, typically 96–98.5% against the rest of your equipment before price enters the decision. Size the inverter against the loads you need to run simultaneously, not against the total wattage of every appliance in the building — a 5 kW inverter comfortably runs a fridge, fans, lights and a couple of ACs, but not all of them plus a water pump starting at the same time.

Where can I buy Hopewind 250kW On Grid Solar Inverter?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.