Inverters
Inverters
BrandHisel
Hisel ASN 10TL G2 On Grid Solar Inverter
BrandHisel- Model
- HISL-01
- Specifications
- 12
- Voltage range140-1000V
- Output Power11kW
- Output Current14.4A
- Efficiency98.60%
- Input Power15kW
- View all 12 specifications ↓
Overview
Here’s an in‑depth overview of the Hisel ASN‑10TL‑G2 10 kW Three‑Phase On‑Grid Solar Inverter, including specs, local prices, and how it compares to similar options on the marketFeatures:String current
up to 20AMax. e ciency
98.6%Wide range of
MPPT voltageAFCI FunctionMax. 150%
Specifications
| Summary | |
|---|---|
| Voltage range | 140-1000V |
| Output Power | 11kW |
| Output Current | 14.4A |
| HARDWARE FEATURES | |
| Efficiency | 98.60% |
| Input Power | 15kW |
| TECHNICAL SPECIFICATION | |
| Rated Voltage | 620V |
| General Specification | |
| Operating Temperature Range | –30 ... +60°C |
| Protection | IP66 |
| Voltage | 220V/380V,230V/400V,3/N/PE |
| Weight | 12.6Kg |
| Input Voltage | 1100V |
| Dimensions | 448*336*174mm |
What these specifications mean
Hisel ASN 10TL G2 On Grid Solar Inverter is listed with 12 published specifications from Hisel, including voltage range of 140-1000V, output power of 11kW, output current of 14.4A and efficiency of 98.60%. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.
For an inverter, the figures that matter most are peak and weighted (European/CEC) efficiency, typically 96–98.5%, topology — on-grid, off-grid, hybrid or micro, continuous AC output in kW, which caps the load you can run at once and surge or peak rating, which covers the brief inrush of motors and compressors. It is the component that decides what a solar system can do: how much power you can draw at once, whether you can export to the grid, whether the system keeps running in a blackout, and how well the panels and battery are managed day to day.
Before you buy an inverter
The checks below apply to any inverter. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Check the surge rating if you run motors — deep-well pumps, compressors and older air conditioners can draw two to three times their running current for a few seconds at start-up.
- Choose a hybrid inverter if a battery is in your plan now or later; retrofitting storage onto a pure grid-tie inverter usually means buying a second unit or an AC-coupled battery system.
- Confirm the inverter is approved by your local utility or distribution network before you buy if you intend to export power — grid connection depends on certified anti-islanding and local grid-code compliance, not on the inverter's specifications alone.
- Match the battery communication protocol (CAN bus or RS485) between inverter and battery. Compatible voltages are not enough; without a supported protocol the battery management system and inverter cannot agree on charge limits.
Where buyers lose money
- Buying on peak-watt price alone. A cheap inverter with a narrow MPPT window forces awkward string layouts and can strand a portion of the array.
- Ignoring the ambient temperature rating. Inverters derate in heat, so a unit rated 5 kW at 25 °C may deliver noticeably less on a hot roof-adjacent wall at 45 °C.
- Assuming any grid-tie inverter keeps the lights on during an outage. Standard on-grid units shut down for safety unless they have a dedicated backup or islanding output.
Price and availability
No price is published for Hisel ASN 10TL G2 On Grid Solar Inverter at the moment. Pricing on solar equipment moves with supply and exchange rates, and some distributors quote only on request — the specifications above are still directly comparable against alternatives that do list a price.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Hisel locally before ordering.
Hisel ASN 10TL G2 On Grid Solar Inverter — frequently asked questions
What are the specifications of Hisel ASN 10TL G2 On Grid Solar Inverter?
We hold 12 published specifications for this inverter, including voltage range 140-1000V, output power 11kW, output current 14.4A, efficiency 98.60% and input power 15kW. The full table is on this page, listed under model HISL-01.
Who makes Hisel ASN 10TL G2 On Grid Solar Inverter?
Hisel ASN 10TL G2 On Grid Solar Inverter is a Hisel product, listed under inverters with model reference HISL-01. The Hisel brand page lists the rest of its range so you can compare across the catalogue.
Is Hisel ASN 10TL G2 On Grid Solar Inverter right for my system?
That depends on what it has to connect to. For an inverter, check continuous AC output in kW, which caps the load you can run at once, surge or peak rating, which covers the brief inrush of motors and compressors and maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect against the rest of your equipment before price enters the decision. Check the surge rating if you run motors — deep-well pumps, compressors and older air conditioners can draw two to three times their running current for a few seconds at start-up.
Where can I buy Hisel ASN 10TL G2 On Grid Solar Inverter?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.
