Inverters

Fusion 10 kW/ 48 V Hybrid Solar inverter

₹ 279,000INR · price may vary

Model: Fusion 10H
Specifications: 0

Overview

Loom Solar Fusion 10 kW, 48 V Hybrid Solar Inverter is a versatile device that works as both an on-grid and off-grid system, ensuring efficient, safe, and reliable energy solutions. It features DC reverse-polarity, protection, and insulation monitoring, which helps prevent potential damage from incorrect wiring or insulation problems. With a capacity of 10 kVA and grid export features, this inverter is ideal for larger systems and higher energy consumption needs while returning the extra energy to the grid. Its IP65-rated junction box and heat sink design offer enhanced reliability, better durability, and excellent performance even in extreme temperatures. The Fusion 5 kW inverter is designed to be expandable, enabling its capacity to grow in line with increasing energy demands. It also provides the feature of quick grid disconnection in case of a grid outage to protect line workers from potential accidents. This inverter is ideal for larger homes, commercial buildings, or industries that need a robust, high-capacity solar solution.

Technology: Sine wave solar inverter for efficient energy conversion.

High Efficiency: Up to 97.60% output efficiency with minimal energy conversion loss.

Display: 4.4-inch colored LCD with touch buttons for user-friendly operation.

Wi-Fi Monitoring: Built-in feature for tracking system performance via mobile app.

Battery Compatibility: Compatible with Lead-Acid, Lithium-Ion, and LiFePO4 batteries for versatile energy storage.

Parallel Connection: Ability to connect up to 9 inverters for increased capacity in a single-phase setup.

Premium Warranty: 5-year manufacturing and performance warranty for long-term reliability.

Electrical Specifications

Capacity (kW)

10 kW, 48 V

Max. DC Input Power (W)

13000

Rated PV Input Voltage (V)

550 (160-800)

Voltage Operating Range (V)

125-500

Start-Up Voltage

160

Full Load DC Voltage Range (V)

(350-650)

Number of MPPT / Strings per MPPT

2 / 2+1

Rated Output Power (W)

10000

Max. Peak Output Power (W)

11000

AC Output Current (A)

14.70

Efficiency

97.60%

Mechanical Specifications

Model Number

Fusion 10H

Operating temperature (°C)

-45-60°C, >45°C derating

Cooling

Natural Cooling

Communication With BMS

RS485; CAN

Protection Degree

IP65

Installation Style

Wall-Mount

Output Over-Voltage Protection

DC Type II/AC Type III

Standard Warranty

5 Years

Feed-in Phase

Three-Phase

Topology

Transformerless

Shipping Details

Weight (kg)

15.1

Dimensions (mm)

422 x 702 x 281

Download the Datasheet and user manual to see more technical details

Reading the specifications

Detailed specifications for Fusion 10 kW/ 48 V Hybrid Solar inverter have not been published yet. Loom Solar lists this inverter in the Inverters, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For an inverter, the figures that matter most are continuous AC output in kW, which caps the load you can run at once, surge or peak rating, which covers the brief inrush of motors and compressors, maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect and the MPPT voltage window, which decides how many panels go in a string. It is the component that decides what a solar system can do: how much power you can draw at once, whether you can export to the grid, whether the system keeps running in a blackout, and how well the panels and battery are managed day to day.

What to check before ordering

The checks below apply to any inverter. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Match the battery communication protocol (CAN bus or RS485) between inverter and battery. Compatible voltages are not enough; without a supported protocol the battery management system and inverter cannot agree on charge limits.
Look at the warranty term and what it covers. Five years is the common baseline, ten is offered by stronger brands, and extensions are often cheaper bought with the unit than later.
Size the inverter against the loads you need to run simultaneously, not against the total wattage of every appliance in the building — a 5 kW inverter comfortably runs a fridge, fans, lights and a couple of ACs, but not all of them plus a water pump starting at the same time.
Keep the panel array between roughly 1.0 and 1.3 times the inverter's rating. Slight oversizing (a higher DC-to-AC ratio) captures more energy on cloudy mornings and winter days; going far beyond it wastes generation through clipping.

Where buyers lose money

Assuming any grid-tie inverter keeps the lights on during an outage. Standard on-grid units shut down for safety unless they have a dedicated backup or islanding output.
Overlooking the IP rating. An outdoor installation needs at least IP65; indoor-rated units mounted outside fail early.
Buying on peak-watt price alone. A cheap inverter with a narrow MPPT window forces awkward string layouts and can strand a portion of the array.

Price and availability

Fusion 10 kW/ 48 V Hybrid Solar inverter is listed at ₹ 279,000 (INR). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Loom Solar locally before ordering.

Fusion 10 kW/ 48 V Hybrid Solar inverter — frequently asked questions

How much does Fusion 10 kW/ 48 V Hybrid Solar inverter cost?

Fusion 10 kW/ 48 V Hybrid Solar inverter is listed at ₹ 279,000 (INR). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes Fusion 10 kW/ 48 V Hybrid Solar inverter?

Fusion 10 kW/ 48 V Hybrid Solar inverter is a Loom Solar product, listed under inverters with model reference Fusion 10H. The Loom Solar brand page lists the rest of its range so you can compare across the catalogue.

Is Fusion 10 kW/ 48 V Hybrid Solar inverter right for my system?

That depends on what it has to connect to. For an inverter, check peak and weighted (European/CEC) efficiency, typically 96–98.5%, topology — on-grid, off-grid, hybrid or micro and continuous AC output in kW, which caps the load you can run at once against the rest of your equipment before price enters the decision. Size the inverter against the loads you need to run simultaneously, not against the total wattage of every appliance in the building — a 5 kW inverter comfortably runs a fridge, fans, lights and a couple of ACs, but not all of them plus a water pump starting at the same time.

Where can I buy Fusion 10 kW/ 48 V Hybrid Solar inverter?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.