Inverters
Inverters
BrandVictron Energy
EasySolar-II 48/3000/35-32 MPPT 250/70 GX
$ 1,552.95USD · price may vary
BrandVictron Energy- Model
- PMP482307010
- Specifications
- 0
Overview
All-in-one solar power solution
The EasySolar-II GX combines an MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring.
Models: 3000VA, 5000VA
The all-in-one solar power solution
The Victron EasySolar-II GX integrates the following elements:
A MultiPlus-II inverter/charger
A SmartSolar MPPT -Tr solar charge controller
A GX device with a 2 x 16-character display.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
Display and Wi-Fi
The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device.
In addition, Wi-Fi can be used to set up the system and to change settings.
Solar charge controller
The DC output of the SmartSolar MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger.
The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT.
GX device
The integrated GX device includes:
A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port.
A USB port
An Ethernet port
A VE.Direct port
The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.
Specifications
3000VA
Charge voltage 'absorption': 28.8 V
Charge voltage 'float': 27.6 V
Storage mode: 26.4 V
Maximum battery charge current: 70 A
Maximum PV Power: 2000W
Maximum PV open circuit voltage: 250V
Self-consumption: 20mA
Weight: 26kg
Dimensions (h x w x d): 499 x 268 x 237
5000VA
Charge voltage 'absorption': 57.6 V
Charge voltage 'float': 55.2 V
Storage mode: 52.8 V
Maximum battery charge current: 70 A
Maximum PV Power: 5800W
Maximum PV open circuit voltage: 250V
Self-consumption: 20mA
Weight: 26kg
Dimensions (h x w x d): 604 x 323 x 253
Still Have Questions About EasySolar II 250/70 GX? Give us a call today 1-877-242-2792
How to read this datasheet
Detailed specifications for EasySolar-II 48/3000/35-32 MPPT 250/70 GX have not been published yet. Victron Energy lists this inverter in the Inverters, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.
For an inverter, the figures that matter most are topology — on-grid, off-grid, hybrid or micro, continuous AC output in kW, which caps the load you can run at once, surge or peak rating, which covers the brief inrush of motors and compressors and maximum PV input and the number of MPPT trackers, which set how many panel strings you can connect. It is the component that decides what a solar system can do: how much power you can draw at once, whether you can export to the grid, whether the system keeps running in a blackout, and how well the panels and battery are managed day to day.
What to check before ordering
The checks below apply to any inverter. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Size the inverter against the loads you need to run simultaneously, not against the total wattage of every appliance in the building — a 5 kW inverter comfortably runs a fridge, fans, lights and a couple of ACs, but not all of them plus a water pump starting at the same time.
- Keep the panel array between roughly 1.0 and 1.3 times the inverter's rating. Slight oversizing (a higher DC-to-AC ratio) captures more energy on cloudy mornings and winter days; going far beyond it wastes generation through clipping.
- Check the surge rating if you run motors — deep-well pumps, compressors and older air conditioners can draw two to three times their running current for a few seconds at start-up.
- Choose a hybrid inverter if a battery is in your plan now or later; retrofitting storage onto a pure grid-tie inverter usually means buying a second unit or an AC-coupled battery system.
What people get wrong
- Ignoring the ambient temperature rating. Inverters derate in heat, so a unit rated 5 kW at 25 °C may deliver noticeably less on a hot roof-adjacent wall at 45 °C.
- Assuming any grid-tie inverter keeps the lights on during an outage. Standard on-grid units shut down for safety unless they have a dedicated backup or islanding output.
- Overlooking the IP rating. An outdoor installation needs at least IP65; indoor-rated units mounted outside fail early.
Price and availability
EasySolar-II 48/3000/35-32 MPPT 250/70 GX is listed at $ 1,553 (USD). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Victron Energy locally before ordering.
EasySolar-II 48/3000/35-32 MPPT 250/70 GX — frequently asked questions
How much does EasySolar-II 48/3000/35-32 MPPT 250/70 GX cost?
EasySolar-II 48/3000/35-32 MPPT 250/70 GX is listed at $ 1,553 (USD). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.
Who makes EasySolar-II 48/3000/35-32 MPPT 250/70 GX?
EasySolar-II 48/3000/35-32 MPPT 250/70 GX is a Victron Energy product, listed under inverters with model reference PMP482307010. The Victron Energy brand page lists the rest of its range so you can compare across the catalogue.
Is EasySolar-II 48/3000/35-32 MPPT 250/70 GX right for my system?
That depends on what it has to connect to. For an inverter, check the MPPT voltage window, which decides how many panels go in a string, peak and weighted (European/CEC) efficiency, typically 96–98.5% and topology — on-grid, off-grid, hybrid or micro against the rest of your equipment before price enters the decision. Choose a hybrid inverter if a battery is in your plan now or later; retrofitting storage onto a pure grid-tie inverter usually means buying a second unit or an AC-coupled battery system.
Where can I buy EasySolar-II 48/3000/35-32 MPPT 250/70 GX?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.
