Inverters

2000W PRO | Pure Sine Wave Inverter | with ATS and RCD

A$ 699AUD · price may vary

Model: 2000WPRO
Specifications: 0

Overview

The iTechworld PRO Inverter range was designed and developed to convert your 12V power from your battery system into safe and reliable 240V power. This allows you to operate appliances you’d typically have to stay at home to use, from the comfort of your caravan, camper, or 4WD. The PRO range comes with an inverter with RCD and automatic transfer switch as standard.

Pure sine wave output for clean and stable power delivery.

Vibration-proof technology, built for corrugated tracks and roads

Load-controlled cooling fan for optimal temperature management.

Enjoy smoother and more efficient appliance operation, minimising heat and noise.

Power any 240V equipment, opening a world of possibilities for your adventures.

Take all the comforts of home with you on your travels, confident in the safety and reliability of your power supply.

RC3 PRO Intelligent On/Off Remote Control For iTechworld Pure Sine Wave Inverters With RCD and ATS and 00 gauge with installed 250 Amp Fuse sold separately.

With its pure sine wave output, our 2000W 12V inverter ensures seamless and efficient operation of your appliances, reducing heat and noise for optimised performance. Designed with robustness in mind, it can withstand the harshest Australian conditions.

Utilising an Australian standard 240V 3-pin outlet, you can easily run high-draw appliances on the go. To achieve maximum output the iTechworld 2000W PRO also has the option of being hardwired via the terminal block into your electrical system; this will allow for loads of 10A or more to be powered via the iTechworld 2000W PRO inverter safely and efficiently.

Safety is paramount with the iTechworld 2000W PRO inverter, featuring multiple levels of protection against overload, short circuits, and over-temperature. The load-controlled cooling fan maintains optimal operating conditions by engaging at specific power consumption levels.

The built-in Automatic Transfer Switch (ATS) enables smooth switching between your primary power source and the inverter, making it ideal for various applications, such as caravans, motorhomes, and off-grid setups. Additionally, because this is an inverter with an RCD (Residual Current Device), you get an extra layer of protection by instantly disconnecting the power during a fault for utmost safety.

For added convenience, consider our optional remote on/off switch (RC3), sold separately, which allows you to control the inverter remotely from up to 5 metres away. With the RC2, conveniently manage your 240V power supply even when the inverter is out of sight.

Experience the freedom and assurance of reliable power with the iTechworld 2000W PRO Pure Sine Wave Inverter. Embrace your journey with confidence, knowing you have a reliable and safe power source.

PACKAGE CONTENTS

1x iTECHWORLD 2000w PRO Pure Sine Wave Inverter with RCD

1x User Guide

00 Gauge with installed 250 Amp Fuse sold separately.

WARRANTY

Statutory warranty is 12 months from date of purchase.

Reading the specifications

Detailed specifications for 2000W PRO | Pure Sine Wave Inverter | with ATS and RCD have not been published yet. iTechworld lists this inverter in the Inverters, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For an inverter, the figures that matter most are the MPPT voltage window, which decides how many panels go in a string, peak and weighted (European/CEC) efficiency, typically 96–98.5%, topology — on-grid, off-grid, hybrid or micro and continuous AC output in kW, which caps the load you can run at once. It is the component that decides what a solar system can do: how much power you can draw at once, whether you can export to the grid, whether the system keeps running in a blackout, and how well the panels and battery are managed day to day.

Before you buy an inverter

The checks below apply to any inverter. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Confirm the inverter is approved by your local utility or distribution network before you buy if you intend to export power — grid connection depends on certified anti-islanding and local grid-code compliance, not on the inverter's specifications alone.
Match the battery communication protocol (CAN bus or RS485) between inverter and battery. Compatible voltages are not enough; without a supported protocol the battery management system and inverter cannot agree on charge limits.
Look at the warranty term and what it covers. Five years is the common baseline, ten is offered by stronger brands, and extensions are often cheaper bought with the unit than later.
Size the inverter against the loads you need to run simultaneously, not against the total wattage of every appliance in the building — a 5 kW inverter comfortably runs a fridge, fans, lights and a couple of ACs, but not all of them plus a water pump starting at the same time.

Where buyers lose money

Ignoring the ambient temperature rating. Inverters derate in heat, so a unit rated 5 kW at 25 °C may deliver noticeably less on a hot roof-adjacent wall at 45 °C.
Assuming any grid-tie inverter keeps the lights on during an outage. Standard on-grid units shut down for safety unless they have a dedicated backup or islanding output.
Overlooking the IP rating. An outdoor installation needs at least IP65; indoor-rated units mounted outside fail early.

Price and availability

2000W PRO | Pure Sine Wave Inverter | with ATS and RCD is listed at A$ 699 (AUD). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports iTechworld locally before ordering.

2000W PRO | Pure Sine Wave Inverter | with ATS and RCD — frequently asked questions

How much does 2000W PRO | Pure Sine Wave Inverter | with ATS and RCD cost?

2000W PRO | Pure Sine Wave Inverter | with ATS and RCD is listed at A$ 699 (AUD). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes 2000W PRO | Pure Sine Wave Inverter | with ATS and RCD?

2000W PRO | Pure Sine Wave Inverter | with ATS and RCD is a iTechworld product, listed under inverters with model reference 2000WPRO. The iTechworld brand page lists the rest of its range so you can compare across the catalogue.

Is 2000W PRO | Pure Sine Wave Inverter | with ATS and RCD right for my system?

That depends on what it has to connect to. For an inverter, check the MPPT voltage window, which decides how many panels go in a string, peak and weighted (European/CEC) efficiency, typically 96–98.5% and topology — on-grid, off-grid, hybrid or micro against the rest of your equipment before price enters the decision. Size the inverter against the loads you need to run simultaneously, not against the total wattage of every appliance in the building — a 5 kW inverter comfortably runs a fridge, fans, lights and a couple of ACs, but not all of them plus a water pump starting at the same time.

Where can I buy 2000W PRO | Pure Sine Wave Inverter | with ATS and RCD?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.