SolarBazaar
Vaults 2.52kWh IP20 Lithium-Ion Battery 24V 105Ah
Batteries

Vaults 2.52kWh IP20 Lithium-Ion Battery 24V 105Ah

₨ 120,000PKR · price may vary

BrandVaults
Model
VAUS-01
Specifications
8

Specifications

TECHNICAL SPECIFICATION
Nominal voltage24
Working temperature0 - 50Charge
General Specification
Charge Current30
Communication-
Discharge Voltage23.5 - 28
Nominal Capacity2688
Weight< 35
Dimension430 x 588 x 106mm

What these specifications mean

Vaults 2.52kWh IP20 Lithium-Ion Battery 24V 105Ah is listed with 8 published specifications from Vaults, including nominal voltage of 24, working temperature of 0 - 50Charge, charge current of 30 and communication of -. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.

For a battery, the figures that matter most are nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh), usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50%, system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack and continuous charge and discharge current, which limits how much power you can draw from the pack. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.

A solar battery stores the energy your panels generate during the day so it can be used after sunset, during a power cut, or whenever grid electricity is most expensive.

Choosing a battery: the checks that matter

The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

  • Check the continuous discharge rating against your inverter. A battery that stores plenty of energy but can only deliver 50 A cannot support a large inverter at full output.
  • Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.
  • Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.
  • Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.

Common mistakes

  • Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
  • Mixing old and new batteries, or different chemistries, in one bank. The weakest unit drags the whole bank down and can be damaged by the others.
  • Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.

Price and availability

Vaults 2.52kWh IP20 Lithium-Ion Battery 24V 105Ah is listed at ₨ 120,000 (PKR). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Vaults locally before ordering.

Vaults 2.52kWh IP20 Lithium-Ion Battery 24V 105Ah — frequently asked questions

How much does Vaults 2.52kWh IP20 Lithium-Ion Battery 24V 105Ah cost?

Vaults 2.52kWh IP20 Lithium-Ion Battery 24V 105Ah is listed at ₨ 120,000 (PKR). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

What are the specifications of Vaults 2.52kWh IP20 Lithium-Ion Battery 24V 105Ah?

We hold 8 published specifications for this battery, including nominal voltage 24, working temperature 0 - 50Charge, charge current 30, communication - and discharge voltage 23.5 - 28. The full table is on this page, listed under model VAUS-01.

Who makes Vaults 2.52kWh IP20 Lithium-Ion Battery 24V 105Ah?

Vaults 2.52kWh IP20 Lithium-Ion Battery 24V 105Ah is a Vaults product, listed under batteries with model reference VAUS-01. The Vaults brand page lists the rest of its range so you can compare across the catalogue.

Is Vaults 2.52kWh IP20 Lithium-Ion Battery 24V 105Ah right for my system?

That depends on what it has to connect to. For a battery, check system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack, continuous charge and discharge current, which limits how much power you can draw from the pack and cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4 against the rest of your equipment before price enters the decision. Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.

Where can I buy Vaults 2.52kWh IP20 Lithium-Ion Battery 24V 105Ah?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.

Write a Review

Share your experience — no account needed.

Your rating *

Related Products