Batteries
Batteries
SES Power 5.22kWH IP65 Lithium Ion Battery Power Wall 51.2V 102Ah
₨ 257,000PKR · price may vary
BrandSES Power Battery- Model
- SESR-04
- Specifications
- 8
- Charge Voltage56.16V
- Discharge Current100A
- Rated Voltage51.2v
- Charge Current20A - 50A
- Discharge End Voltage45.6v
- View all 8 specifications ↓
Overview
The SES Power 51.2V 102Ah Lithium-Ion Battery IP65 Power Wall is a high-capacity energy storage solution designed for solar and backup power applications. Here are some of its key features:Features:
Lithium Iron Phosphate (LiFePO4) Battery – Ensures high efficiency, long lifespan,
Specifications
| POWER | |
|---|---|
| Charge Voltage | 56.16V |
| TECHNICAL SPECIFICATION | |
| Discharge Current | 100A |
| Rated Voltage | 51.2v |
| General Specification | |
| Charge Current | 20A - 50A |
| Discharge End Voltage | 45.6v |
| Rated Capacity | 5222Ah |
| Weight | 42kg |
| Dimensions | 500mm, 142mm, 442mm, |
Reading the specifications
SES Power 5.22kWH IP65 Lithium Ion Battery Power Wall 51.2V 102Ah is listed with 8 published specifications from SES Power Battery, including charge voltage of 56.16V, discharge current of 100A, rated voltage of 51.2v and charge current of 20A - 50A. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.
For a battery, the figures that matter most are cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4, round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid, communication protocol (CAN or RS485) for talking to the inverter and nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh). Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.
Choosing a battery: the checks that matter
The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Check the continuous discharge rating against your inverter. A battery that stores plenty of energy but can only deliver 50 A cannot support a large inverter at full output.
- Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.
- Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.
- Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.
What people get wrong
- Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.
- Installing lithium packs in an unventilated, hot enclosure. Sustained high temperature is the fastest way to lose cycle life.
- Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
Price and availability
SES Power 5.22kWH IP65 Lithium Ion Battery Power Wall 51.2V 102Ah is listed at ₨ 257,000 (PKR). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports SES Power Battery locally before ordering.
SES Power 5.22kWH IP65 Lithium Ion Battery Power Wall 51.2V 102Ah — frequently asked questions
How much does SES Power 5.22kWH IP65 Lithium Ion Battery Power Wall 51.2V 102Ah cost?
SES Power 5.22kWH IP65 Lithium Ion Battery Power Wall 51.2V 102Ah is listed at ₨ 257,000 (PKR). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.
What are the specifications of SES Power 5.22kWH IP65 Lithium Ion Battery Power Wall 51.2V 102Ah?
We hold 8 published specifications for this battery, including charge voltage 56.16V, discharge current 100A, rated voltage 51.2v, charge current 20A - 50A and discharge end voltage 45.6v. The full table is on this page, listed under model SESR-04.
Who makes SES Power 5.22kWH IP65 Lithium Ion Battery Power Wall 51.2V 102Ah?
SES Power 5.22kWH IP65 Lithium Ion Battery Power Wall 51.2V 102Ah is a SES Power Battery product, listed under batteries with model reference SESR-04. The SES Power Battery brand page lists the rest of its range so you can compare across the catalogue.
Is SES Power 5.22kWH IP65 Lithium Ion Battery Power Wall 51.2V 102Ah right for my system?
That depends on what it has to connect to. For a battery, check nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh), usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50% and system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack against the rest of your equipment before price enters the decision. Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.
Where can I buy SES Power 5.22kWH IP65 Lithium Ion Battery Power Wall 51.2V 102Ah?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.
