Batteries
Batteries
SES Power 2.56kWh IP20 Lithium Ion Battery Power Wall 25.6V 100Ah
₨ 135,000PKR · price may vary
BrandSES Power Battery- Model
- SESR-02
- Specifications
- 7
- Charge Voltage26.68V
- Rated Voltage25.6V
- Charge Current100A
- Discharge End Voltage22.8V
- Rated Capacity100AH
- View all 7 specifications ↓
Overview
The SES Power 25.6V 100Ah Lithium Ion Battery IP20 Power Wall is a solar energy storage solution designed for home and commercial use. Here are some of its key features:Features:
Lithium Iron Phosphate (LiFePO4) Battery – Provides high efficiency, long lifespan, and safety.IP20 Rati
Specifications
| POWER | |
|---|---|
| Charge Voltage | 26.68V |
| TECHNICAL SPECIFICATION | |
| Rated Voltage | 25.6V |
| General Specification | |
| Charge Current | 100A |
| Discharge End Voltage | 22.8V |
| Rated Capacity | 100AH |
| Weight | 26.98kg |
| Dimensions | 403mm, 396mm, 145mm, |
What these specifications mean
SES Power 2.56kWh IP20 Lithium Ion Battery Power Wall 25.6V 100Ah is listed with 7 published specifications from SES Power Battery, including charge voltage of 26.68V, rated voltage of 25.6V, charge current of 100A and discharge end voltage of 22.8V. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.
For a battery, the figures that matter most are system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack, continuous charge and discharge current, which limits how much power you can draw from the pack, cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4 and round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.
What to check before ordering
The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.
- Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.
- Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.
- Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.
What people get wrong
- Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.
- Installing lithium packs in an unventilated, hot enclosure. Sustained high temperature is the fastest way to lose cycle life.
- Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
Price and availability
SES Power 2.56kWh IP20 Lithium Ion Battery Power Wall 25.6V 100Ah is listed at ₨ 135,000 (PKR). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports SES Power Battery locally before ordering.
SES Power 2.56kWh IP20 Lithium Ion Battery Power Wall 25.6V 100Ah — frequently asked questions
How much does SES Power 2.56kWh IP20 Lithium Ion Battery Power Wall 25.6V 100Ah cost?
SES Power 2.56kWh IP20 Lithium Ion Battery Power Wall 25.6V 100Ah is listed at ₨ 135,000 (PKR). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.
What are the specifications of SES Power 2.56kWh IP20 Lithium Ion Battery Power Wall 25.6V 100Ah?
We hold 7 published specifications for this battery, including charge voltage 26.68V, rated voltage 25.6V, charge current 100A, discharge end voltage 22.8V and rated capacity 100AH. The full table is on this page, listed under model SESR-02.
Who makes SES Power 2.56kWh IP20 Lithium Ion Battery Power Wall 25.6V 100Ah?
SES Power 2.56kWh IP20 Lithium Ion Battery Power Wall 25.6V 100Ah is a SES Power Battery product, listed under batteries with model reference SESR-02. The SES Power Battery brand page lists the rest of its range so you can compare across the catalogue.
Is SES Power 2.56kWh IP20 Lithium Ion Battery Power Wall 25.6V 100Ah right for my system?
That depends on what it has to connect to. For a battery, check usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50%, system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack and continuous charge and discharge current, which limits how much power you can draw from the pack against the rest of your equipment before price enters the decision. Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.
Where can I buy SES Power 2.56kWh IP20 Lithium Ion Battery Power Wall 25.6V 100Ah?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.
