Batteries
Batteries
ITEL 5.12kWh IP20 Lithium Ion Battery 51.2V 100Ah
₨ 237,000PKR · price may vary
BrandItel Energy- Model
- ITEL-56
- Specifications
- 13
- Charging Current50A
- Charging Voltage58.4V
- Communication PortRS485 / CAN / RS232
- Nominal voltage51.2V
- Battery TypeLiFePO₄
- View all 13 specifications ↓
Overview
The IPL-51100 is a high-performance lithium iron phosphate (LiFePO₄) battery designed for solar energy storage systems. With a nominal voltage of 51.2V and 5.12kWh energy capacity, it offers reliable power backup for residential, commercial, and industrial applications. It
Specifications
| HARDWARE FEATURES | |
|---|---|
| Charging Current | 50A |
| Charging Voltage | 58.4V |
| TECHNICAL SPECIFICATION | |
| Communication Port | RS485 / CAN / RS232 |
| Nominal voltage | 51.2V |
| General Specification | |
| Battery Type | LiFePO₄ |
| Cooling Type | Natural Cooling |
| Cycle Life | >6000 Cycles @25°C, 0.5C, 80%DOD |
| Discharge Voltage | 40V |
| Nominal Capacity | 100Ah |
| Nominal Energy | 5.12kWh |
| Operating voltage range | 40V–58.4V |
| Weight | 50 kg |
| Dimensions | 450 × 510 × 153 mm |
What these specifications mean
ITEL 5.12kWh IP20 Lithium Ion Battery 51.2V 100Ah is listed with 13 published specifications from Itel Energy, including charging current of 50A, charging voltage of 58.4V, communication port of RS485 / CAN / RS232 and nominal voltage of 51.2V. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.
For a battery, the figures that matter most are system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack, continuous charge and discharge current, which limits how much power you can draw from the pack, cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4 and round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.
Before you buy a battery
The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.
- Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.
- Check the continuous discharge rating against your inverter. A battery that stores plenty of energy but can only deliver 50 A cannot support a large inverter at full output.
- Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.
Common mistakes
- Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.
- Installing lithium packs in an unventilated, hot enclosure. Sustained high temperature is the fastest way to lose cycle life.
- Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
Price and availability
ITEL 5.12kWh IP20 Lithium Ion Battery 51.2V 100Ah is listed at ₨ 237,000 (PKR). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Itel Energy locally before ordering.
ITEL 5.12kWh IP20 Lithium Ion Battery 51.2V 100Ah — frequently asked questions
How much does ITEL 5.12kWh IP20 Lithium Ion Battery 51.2V 100Ah cost?
ITEL 5.12kWh IP20 Lithium Ion Battery 51.2V 100Ah is listed at ₨ 237,000 (PKR). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.
What are the specifications of ITEL 5.12kWh IP20 Lithium Ion Battery 51.2V 100Ah?
We hold 13 published specifications for this battery, including charging current 50A, charging voltage 58.4V, communication port RS485 / CAN / RS232, nominal voltage 51.2V and battery type LiFePO₄. The full table is on this page, listed under model ITEL-56.
Who makes ITEL 5.12kWh IP20 Lithium Ion Battery 51.2V 100Ah?
ITEL 5.12kWh IP20 Lithium Ion Battery 51.2V 100Ah is a Itel Energy product, listed under batteries with model reference ITEL-56. The Itel Energy brand page lists the rest of its range so you can compare across the catalogue.
Is ITEL 5.12kWh IP20 Lithium Ion Battery 51.2V 100Ah right for my system?
That depends on what it has to connect to. For a battery, check system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack, continuous charge and discharge current, which limits how much power you can draw from the pack and cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4 against the rest of your equipment before price enters the decision. Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.
Where can I buy ITEL 5.12kWh IP20 Lithium Ion Battery 51.2V 100Ah?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.
