Batteries

Heavy Duty | Protective Case | For JS80 Lithium Jumpstarter

A$ 69AUD · price may vary

Model: JS80CASE
Specifications: 0

Overview

The lightweight, durable, and rugged JS80 jumpstarter protective case has a tough custom exterior, zipper closures, and a reinforced carry handle.

The heavy-duty exterior material offers protection from impact, dirt, dust and other environmental factors. At the same time, the tailor moulded design wrapped in a soft padded liner perfectly fits, stores, and protects the JS80 lithium jump starter and accessories.

Use this Heavy Duty case to easily store your JS80 and accessories in your glove box, boot, vehicle, garage or anywhere you desire!

Lightweight, durable and rugged custom exterior.

Equipped with a zipper closure and isolated pockets for multiple accessory storage.

Reinforced heavy-duty, ergonomic handle.

Offers protection from impact, dirt, dust and environmental factors.

Tailored to fit the JS80 3000A Lithium Jumpstarter. (not included)

Additional pockets for JS80 accessories. (not included)

Reading the specifications

Detailed specifications for Heavy Duty | Protective Case | For JS80 Lithium Jumpstarter have not been published yet. iTechworld lists this battery in the Batteries, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a battery, the figures that matter most are communication protocol (CAN or RS485) for talking to the inverter, nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh), usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50% and system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.

What to check before ordering

The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.
Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.
Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.
Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.

Where buyers lose money

Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.
Installing lithium packs in an unventilated, hot enclosure. Sustained high temperature is the fastest way to lose cycle life.
Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.

Price and availability

Heavy Duty | Protective Case | For JS80 Lithium Jumpstarter is listed at A$ 69 (AUD). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports iTechworld locally before ordering.

Heavy Duty | Protective Case | For JS80 Lithium Jumpstarter — frequently asked questions

How much does Heavy Duty | Protective Case | For JS80 Lithium Jumpstarter cost?

Heavy Duty | Protective Case | For JS80 Lithium Jumpstarter is listed at A$ 69 (AUD). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes Heavy Duty | Protective Case | For JS80 Lithium Jumpstarter?

Heavy Duty | Protective Case | For JS80 Lithium Jumpstarter is a iTechworld product, listed under batteries with model reference JS80CASE. The iTechworld brand page lists the rest of its range so you can compare across the catalogue.

Is Heavy Duty | Protective Case | For JS80 Lithium Jumpstarter right for my system?

That depends on what it has to connect to. For a battery, check continuous charge and discharge current, which limits how much power you can draw from the pack, cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4 and round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid against the rest of your equipment before price enters the decision. Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.

Where can I buy Heavy Duty | Protective Case | For JS80 Lithium Jumpstarter?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.