Batteries
Batteries
BrandEpever
Epever 2.56kWh Wall Mounted Lithium Battery 25.6V 100Ah
BrandEpever- Model
- EPER-05
- Specifications
- 11
- DisplayLCD
- Ingress Protection RatingIP65
- Nominal voltage25.6
- Battery TypeLiFePO4
- Charge Current75 A
- View all 11 specifications ↓
Overview
This 25.6V 100Ah wall-mounted lithium battery brings together compact design and intuitive LED strip display, offering a user-friendly way to monitor power status at a glance. Its wall-hanging structure makes installation quick and space-efficient, ideal for residential or small
Specifications
| Display Specification | |
|---|---|
| Display | LCD |
| TECHNICAL SPECIFICATION | |
| Ingress Protection Rating | IP65 |
| Nominal voltage | 25.6 |
| General Specification | |
| Battery Type | LiFePO4 |
| Charge Current | 75 A |
| Communication | RS485 CAN |
| Cycle Life | ＞6000 cycles (25°C, 0.5C ) 80%DOD |
| Energy Capacity | 2560 |
| Nominal Capacity | 100 aH |
| Weight | 27.4±0.5 |
| Dimensions | 360*180*460 |
What these specifications mean
Epever 2.56kWh Wall Mounted Lithium Battery 25.6V 100Ah is listed with 11 published specifications from Epever, including display of LCD, ingress protection rating of IP65, nominal voltage of 25.6 and battery type of LiFePO4. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.
For a battery, the figures that matter most are system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack, continuous charge and discharge current, which limits how much power you can draw from the pack, cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4 and round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.
Choosing a battery: the checks that matter
The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Check the continuous discharge rating against your inverter. A battery that stores plenty of energy but can only deliver 50 A cannot support a large inverter at full output.
- Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.
- Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.
- Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.
Where buyers lose money
- Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.
- Installing lithium packs in an unventilated, hot enclosure. Sustained high temperature is the fastest way to lose cycle life.
- Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
Price and availability
No price is published for Epever 2.56kWh Wall Mounted Lithium Battery 25.6V 100Ah at the moment. Pricing on solar equipment moves with supply and exchange rates, and some distributors quote only on request — the specifications above are still directly comparable against alternatives that do list a price.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Epever locally before ordering.
Epever 2.56kWh Wall Mounted Lithium Battery 25.6V 100Ah — frequently asked questions
What are the specifications of Epever 2.56kWh Wall Mounted Lithium Battery 25.6V 100Ah?
We hold 11 published specifications for this battery, including display LCD, ingress protection rating IP65, nominal voltage 25.6, battery type LiFePO4 and charge current 75 A. The full table is on this page, listed under model EPER-05.
Who makes Epever 2.56kWh Wall Mounted Lithium Battery 25.6V 100Ah?
Epever 2.56kWh Wall Mounted Lithium Battery 25.6V 100Ah is a Epever product, listed under batteries with model reference EPER-05. The Epever brand page lists the rest of its range so you can compare across the catalogue.
Is Epever 2.56kWh Wall Mounted Lithium Battery 25.6V 100Ah right for my system?
That depends on what it has to connect to. For a battery, check nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh), usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50% and system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack against the rest of your equipment before price enters the decision. Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.
Where can I buy Epever 2.56kWh Wall Mounted Lithium Battery 25.6V 100Ah?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.
