Batteries
Batteries
BrandDyness
Dyness PowerBrick Max 16.07kWh IP65 Lithium ion Battery 51.2V – 314Ah
₨ 700,000PKR · price may vary
BrandDyness- Model
- DYNS-06
- Specifications
- 4
- Battery ChemistryLithium Iron Phosphate (LiFePO4/LFP)
- Capacity16.076 kWh
- Performance8,000 cycles
- Voltage51.2V nominal
Overview
The Dyness PowerBrick Max (also referred to as the PowerBrick SC) is a high-capacity, low-voltage lithium-ion battery designed for residential and light commercial solar energy storage. It features a nominal capacity of 16.076 kWh using advanced 314Ah LiFePO4 cells, making it one of
Specifications
| General Specification | |
|---|---|
| Battery Chemistry | Lithium Iron Phosphate (LiFePO4/LFP) |
| Capacity | 16.076 kWh |
| Performance | 8,000 cycles |
| Voltage | 51.2V nominal |
How to read this datasheet
Dyness PowerBrick Max 16.07kWh IP65 Lithium ion Battery 51.2V – 314Ah is listed with 4 published specifications from Dyness, including battery chemistry of Lithium Iron Phosphate (LiFePO4/LFP), capacity of 16.076 kWh, performance of 8,000 cycles and voltage of 51.2V nominal. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.
For a battery, the figures that matter most are usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50%, system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack, continuous charge and discharge current, which limits how much power you can draw from the pack and cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.
Before you buy a battery
The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.
- Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.
- Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.
- Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.
Common mistakes
- Mixing old and new batteries, or different chemistries, in one bank. The weakest unit drags the whole bank down and can be damaged by the others.
- Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.
- Installing lithium packs in an unventilated, hot enclosure. Sustained high temperature is the fastest way to lose cycle life.
Price and availability
Dyness PowerBrick Max 16.07kWh IP65 Lithium ion Battery 51.2V – 314Ah is listed at ₨ 700,000 (PKR). Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Dyness locally before ordering.
Dyness PowerBrick Max 16.07kWh IP65 Lithium ion Battery 51.2V – 314Ah — frequently asked questions
How much does Dyness PowerBrick Max 16.07kWh IP65 Lithium ion Battery 51.2V – 314Ah cost?
Dyness PowerBrick Max 16.07kWh IP65 Lithium ion Battery 51.2V – 314Ah is listed at ₨ 700,000 (PKR). The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.
What are the specifications of Dyness PowerBrick Max 16.07kWh IP65 Lithium ion Battery 51.2V – 314Ah?
We hold 4 published specifications for this battery, including battery chemistry Lithium Iron Phosphate (LiFePO4/LFP), capacity 16.076 kWh, performance 8,000 cycles and voltage 51.2V nominal. The full table is on this page, listed under model DYNS-06.
Who makes Dyness PowerBrick Max 16.07kWh IP65 Lithium ion Battery 51.2V – 314Ah?
Dyness PowerBrick Max 16.07kWh IP65 Lithium ion Battery 51.2V – 314Ah is a Dyness product, listed under batteries with model reference DYNS-06. The Dyness brand page lists the rest of its range so you can compare across the catalogue.
Is Dyness PowerBrick Max 16.07kWh IP65 Lithium ion Battery 51.2V – 314Ah right for my system?
That depends on what it has to connect to. For a battery, check round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid, communication protocol (CAN or RS485) for talking to the inverter and nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh) against the rest of your equipment before price enters the decision. Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.
Where can I buy Dyness PowerBrick Max 16.07kWh IP65 Lithium ion Battery 51.2V – 314Ah?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.
