Batteries
DSE-9474 24 Volt 30 Amp Intelligent Battery Charger
BrandDeepsea Electronics- Model
- DEES-31
- Specifications
- 6
- Voltage range90 V to 305 V (L-N)
- Efficiency>90%
- Operating Temperature-30oC to +55oC
- Weight2.5 kg
- Dimensions240 mm x 263 mm x 89 mm
- View all 6 specifications ↓
Overview
OVERVIEW:The DSE9474 is an intelligent 24-volt, 30 amp CAN enabled switch-mode battery charger that can be programmed for different charging curves. This helps to maximise battery life. The charger is programmed using the DSE Configuration Suite Software. The charger can be DIN rail or chassis mount
Specifications
| Summary | |
|---|---|
| Voltage range | 90 V to 305 V (L-N) |
| HARDWARE FEATURES | |
| Efficiency | >90% |
| General Specification | |
| Operating Temperature | -30oC to +55oC |
| Weight | 2.5 kg |
| Dimensions | 240 mm x 263 mm x 89 mm |
| WIRELESS FEATURES | |
| Frequency Range | 48 Hz to 64 Hz (L-N) |
How to read this datasheet
DSE-9474 24 Volt 30 Amp Intelligent Battery Charger is listed with 6 published specifications from Deepsea Electronics, including voltage range of 90 V to 305 V (L-N), efficiency of >90%, operating temperature of -30oC to +55oC and weight of 2.5 kg. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.
For a battery, the figures that matter most are system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack, continuous charge and discharge current, which limits how much power you can draw from the pack, cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4 and round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.
What to check before ordering
The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.
- Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.
- Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.
- Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.
Common mistakes
- Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.
- Installing lithium packs in an unventilated, hot enclosure. Sustained high temperature is the fastest way to lose cycle life.
- Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
Price and availability
No price is published for DSE-9474 24 Volt 30 Amp Intelligent Battery Charger at the moment. Pricing on solar equipment moves with supply and exchange rates, and some distributors quote only on request — the specifications above are still directly comparable against alternatives that do list a price.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in your country: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Deepsea Electronics locally before ordering.
DSE-9474 24 Volt 30 Amp Intelligent Battery Charger — frequently asked questions
What are the specifications of DSE-9474 24 Volt 30 Amp Intelligent Battery Charger?
We hold 6 published specifications for this battery, including voltage range 90 V to 305 V (L-N), efficiency >90%, operating temperature -30oC to +55oC, weight 2.5 kg and dimensions 240 mm x 263 mm x 89 mm. The full table is on this page, listed under model DEES-31.
Who makes DSE-9474 24 Volt 30 Amp Intelligent Battery Charger?
DSE-9474 24 Volt 30 Amp Intelligent Battery Charger is a Deepsea Electronics product, listed under batteries with model reference DEES-31. The Deepsea Electronics brand page lists the rest of its range so you can compare across the catalogue.
Is DSE-9474 24 Volt 30 Amp Intelligent Battery Charger right for my system?
That depends on what it has to connect to. For a battery, check communication protocol (CAN or RS485) for talking to the inverter, nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh) and usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50% against the rest of your equipment before price enters the decision. Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.
Where can I buy DSE-9474 24 Volt 30 Amp Intelligent Battery Charger?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.





