Solar Panels
Jinko 610W N-type Bifical Solar Panel
₨ 29,250PKR · price may vary
BrandJinko- Model
- JINO-17
- Specifications
- 5
- FrameAnodized aluminium alloy
- Output Cable4.0 mm²(+): 400 mm, (-): 200 mm or Customized Length
- Protection ClassClass II
- Weight32.4 kg
- Dimensions2382*1134*30 mm
Specifications
| General Specification | |
|---|---|
| Frame | Anodized aluminium alloy |
| Output Cable | 4.0 mm²(+): 400 mm, (-): 200 mm or Customized Length |
| Protection Class | Class II |
| Weight | 32.4 kg |
| Dimensions | 2382*1134*30 mm |
Reading the specifications
Jinko 610W N-type Bifical Solar Panel is listed with 5 published specifications from Jinko, including frame of Anodized aluminium alloy, output cable of 4.0 mm²(+): 400 mm, (-): 200 mm or Customized Length, protection class of Class II and weight of 32.4 kg. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.
For a solar panel, the figures that matter most are temperature coefficient of power, usually −0.26 to −0.35 %/°C, first-year and annual degradation, and the performance warranty that guarantees them, physical dimensions and weight, which decide what fits your roof and mounting and open-circuit voltage (Voc) and short-circuit current (Isc) for string design. Panels are the generating half of the system and the part that determines how much energy is available at all. They are also the longest-lived component, routinely still producing over 80% of their original output after 25 years.
A solar panel (photovoltaic module) converts sunlight directly into DC electricity, with no moving parts and no fuel.
What to check before ordering
The checks below apply to any solar panel. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Consider N-type TOPCon or bifacial modules where space is tight or the mounting is elevated and reflective — bifacial gains of 5–15% are realistic over a light-coloured flat roof or the ground, and close to zero flush against a dark tile roof.
- Keep every panel in a string identical in model and rating. Mismatched modules in one string pull the whole string down to the weakest one.
- Compare cost per watt rather than price per panel — a higher-wattage module is often cheaper per watt and needs fewer mounting rails, clamps and cable runs.
- Prefer a lower (closer to zero) temperature coefficient in hot climates. Panels lose output as they heat up, and on a 45 °C roof the difference between −0.34 %/°C and −0.29 %/°C is real energy over a year.
Where buyers lose money
- Assuming rated power is what you will see. Real-world output at midday is typically 75–85% of the nameplate figure after temperature, soiling, wiring and inverter losses.
- Underestimating shade. A single shaded cell can suppress an entire string unless you use module-level optimisers or microinverters.
- Ignoring certification. IEC 61215 and IEC 61730 are the baseline; without them, warranty claims and grid approvals get complicated.
Price and availability in Pakistan
Jinko 610W N-type Bifical Solar Panel is listed at ₨ 29,250 (PKR) for Pakistan. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Pakistan: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Jinko locally before ordering.
Jinko 610W N-type Bifical Solar Panel — frequently asked questions
How much does Jinko 610W N-type Bifical Solar Panel cost?
Jinko 610W N-type Bifical Solar Panel is listed at ₨ 29,250 (PKR) for Pakistan. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.
What are the specifications of Jinko 610W N-type Bifical Solar Panel?
We hold 5 published specifications for this solar panel, including frame Anodized aluminium alloy, output cable 4.0 mm²(+): 400 mm, (-): 200 mm or Customized Length, protection class Class II, weight 32.4 kg and dimensions 2382*1134*30 mm. The full table is on this page, listed under model JINO-17.
Who makes Jinko 610W N-type Bifical Solar Panel?
Jinko 610W N-type Bifical Solar Panel is a Jinko product, listed under solar panels with model reference JINO-17. The Jinko brand page lists the rest of its range so you can compare across the catalogue.
Is Jinko 610W N-type Bifical Solar Panel right for my system?
That depends on what it has to connect to. For a solar panel, check first-year and annual degradation, and the performance warranty that guarantees them, physical dimensions and weight, which decide what fits your roof and mounting and open-circuit voltage (Voc) and short-circuit current (Isc) for string design against the rest of your equipment before price enters the decision. Check the physical dimensions against your usable roof area before ordering. Modern modules are large, and a layout that works on paper can fail against obstructions, walkways and setback rules.
Where can I buy Jinko 610W N-type Bifical Solar Panel in Pakistan?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Pakistan — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.





