Solar Panels

Galvanized Iron Frame for Solar Panel (60 Inch, 18 Gauge)

₨ 8,500PKR · price may vary

Model: SGIF-03
Specifications: 0

Size your system More from Galvanized Iron Frame

Reading the specifications

Detailed specifications for Galvanized Iron Frame for Solar Panel (60 Inch, 18 Gauge) have not been published yet. Galvanized Iron Frame lists this solar panel in the Solar Panels, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a solar panel, the figures that matter most are rated power in watt-peak (Wp) measured at standard test conditions, module efficiency, typically 19–23% on current products, cell technology — mono PERC, N-type TOPCon, HJT, or bifacial and temperature coefficient of power, usually −0.26 to −0.35 %/°C. Panels are the generating half of the system and the part that determines how much energy is available at all. They are also the longest-lived component, routinely still producing over 80% of their original output after 25 years.

A solar panel (photovoltaic module) converts sunlight directly into DC electricity, with no moving parts and no fuel.

Before you buy a solar panel

The checks below apply to any solar panel. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Check the physical dimensions against your usable roof area before ordering. Modern modules are large, and a layout that works on paper can fail against obstructions, walkways and setback rules.
Consider N-type TOPCon or bifacial modules where space is tight or the mounting is elevated and reflective — bifacial gains of 5–15% are realistic over a light-coloured flat roof or the ground, and close to zero flush against a dark tile roof.
Keep every panel in a string identical in model and rating. Mismatched modules in one string pull the whole string down to the weakest one.
Compare cost per watt rather than price per panel — a higher-wattage module is often cheaper per watt and needs fewer mounting rails, clamps and cable runs.

What people get wrong

Underestimating shade. A single shaded cell can suppress an entire string unless you use module-level optimisers or microinverters.
Ignoring certification. IEC 61215 and IEC 61730 are the baseline; without them, warranty claims and grid approvals get complicated.
Buying the highest wattage available without checking the inverter's MPPT voltage window — a string that sits outside the window produces less, or nothing.

Price and availability in Pakistan

Galvanized Iron Frame for Solar Panel (60 Inch, 18 Gauge) is listed at ₨ 8,500 (PKR) for Pakistan. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Pakistan: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Galvanized Iron Frame locally before ordering.

Galvanized Iron Frame for Solar Panel (60 Inch, 18 Gauge) — frequently asked questions

How much does Galvanized Iron Frame for Solar Panel (60 Inch, 18 Gauge) cost?

Galvanized Iron Frame for Solar Panel (60 Inch, 18 Gauge) is listed at ₨ 8,500 (PKR) for Pakistan. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes Galvanized Iron Frame for Solar Panel (60 Inch, 18 Gauge)?

Galvanized Iron Frame for Solar Panel (60 Inch, 18 Gauge) is a Galvanized Iron Frame product, listed under solar panels with model reference SGIF-03. The Galvanized Iron Frame brand page lists the rest of its range so you can compare across the catalogue.

Is Galvanized Iron Frame for Solar Panel (60 Inch, 18 Gauge) right for my system?

That depends on what it has to connect to. For a solar panel, check cell technology — mono PERC, N-type TOPCon, HJT, or bifacial, temperature coefficient of power, usually −0.26 to −0.35 %/°C and first-year and annual degradation, and the performance warranty that guarantees them against the rest of your equipment before price enters the decision. Compare cost per watt rather than price per panel — a higher-wattage module is often cheaper per watt and needs fewer mounting rails, clamps and cable runs.

Where can I buy Galvanized Iron Frame for Solar Panel (60 Inch, 18 Gauge) in Pakistan?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Pakistan — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.