Batteries

Sunsynk 10.24kWh IP65 Lithium Ion Battery 10240V 200Ah

₨ 530,000PKR · price may vary

Model: SUNK-05
Specifications: 13

Voltage range~44V – 58V
Cooling MethodNatural cooling (fanless design)
Nominal voltage10240V
Battery TypeLithium Iron Phosphate (LiFePO4)
Capacity200Ah
View all 13 specifications ↓

Overview

The Sunsynk 10.24kWh IP65 Lithium-Ion Battery is a high-capacity energy storage solution designed for advanced solar and hybrid power systems. Built with reliable LiFePO4 technology, it delivers long cycle life, strong safety performance, and stable energy output for residential, com

Specifications

Summary
Voltage range	~44V – 58V
TECHNICAL SPECIFICATION
Cooling Method	Natural cooling (fanless design)
Nominal voltage	10240V
General Specification
Battery Type	Lithium Iron Phosphate (LiFePO4)
Capacity	200Ah
Communication	CAN / RS485
Discharge	Up to 90–95%
Installation type	Wall-mounted / Rack-mounted
Max Charge Current	~100A–150A (model dependent)
Max Discharge Current	~100A–150A (model dependent)
Nominal Energy	10.24kWh
Operating Temperature	0°C to 50°C
Protection Rating	IP65

How to read this datasheet

Sunsynk 10.24kWh IP65 Lithium Ion Battery 10240V 200Ah is listed with 13 published specifications from Sunsynk, including voltage range of ~44V – 58V, cooling method of Natural cooling (fanless design), nominal voltage of 10240V and battery type of Lithium Iron Phosphate (LiFePO4). Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.

For a battery, the figures that matter most are continuous charge and discharge current, which limits how much power you can draw from the pack, cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4, round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid and communication protocol (CAN or RS485) for talking to the inverter. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.

Choosing a battery: the checks that matter

The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Check the continuous discharge rating against your inverter. A battery that stores plenty of energy but can only deliver 50 A cannot support a large inverter at full output.
Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.
Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.
Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.

What people get wrong

Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
Mixing old and new batteries, or different chemistries, in one bank. The weakest unit drags the whole bank down and can be damaged by the others.
Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.

Price and availability in Pakistan

Sunsynk 10.24kWh IP65 Lithium Ion Battery 10240V 200Ah is listed at ₨ 530,000 (PKR) for Pakistan. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Pakistan: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Sunsynk locally before ordering.

Sunsynk 10.24kWh IP65 Lithium Ion Battery 10240V 200Ah — frequently asked questions

How much does Sunsynk 10.24kWh IP65 Lithium Ion Battery 10240V 200Ah cost?

Sunsynk 10.24kWh IP65 Lithium Ion Battery 10240V 200Ah is listed at ₨ 530,000 (PKR) for Pakistan. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

What are the specifications of Sunsynk 10.24kWh IP65 Lithium Ion Battery 10240V 200Ah?

We hold 13 published specifications for this battery, including voltage range ~44V – 58V, cooling method Natural cooling (fanless design), nominal voltage 10240V, battery type Lithium Iron Phosphate (LiFePO4) and capacity 200Ah. The full table is on this page, listed under model SUNK-05.

Who makes Sunsynk 10.24kWh IP65 Lithium Ion Battery 10240V 200Ah?

Sunsynk 10.24kWh IP65 Lithium Ion Battery 10240V 200Ah is a Sunsynk product, listed under batteries with model reference SUNK-05. The Sunsynk brand page lists the rest of its range so you can compare across the catalogue.

Is Sunsynk 10.24kWh IP65 Lithium Ion Battery 10240V 200Ah right for my system?

That depends on what it has to connect to. For a battery, check continuous charge and discharge current, which limits how much power you can draw from the pack, cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4 and round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid against the rest of your equipment before price enters the decision. Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.

Where can I buy Sunsynk 10.24kWh IP65 Lithium Ion Battery 10240V 200Ah in Pakistan?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Pakistan — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.