SolarBazaar
SES Power 5.12kWH IP20  Lithium Ion Battery Power Wall 51.2V 100Ah
Batteries

SES Power 5.12kWH IP20  Lithium Ion Battery Power Wall 51.2V 100Ah

₨ 240,000PKR · price may vary

BrandSES Power Battery
Model
SESR-01
Specifications
8

Overview

The SES Power 51.2V 100Ah Power Wall is a wall-mounted lithium battery designed for solar energy storage. It features Bluetooth connectivity, allowing users to monitor and manage their battery performance remotely. This type of battery is commonly used in residential and commercial s

Specifications

POWER
Charge Voltage56.16v
HARDWARE FEATURES
Watts5120WH
TECHNICAL SPECIFICATION
Discharge Current100A
Rated Voltage51.2V
General Specification
Charge Current100A
Rated Capacity100 Ah
Weight42kg
Dimensions500mm, 142mm, 442mm,

How to read this datasheet

SES Power 5.12kWH IP20  Lithium Ion Battery Power Wall 51.2V 100Ah is listed with 8 published specifications from SES Power Battery, including charge voltage of 56.16v, watts of 5120WH, discharge current of 100A and rated voltage of 51.2V. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.

For a battery, the figures that matter most are continuous charge and discharge current, which limits how much power you can draw from the pack, cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4, round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid and communication protocol (CAN or RS485) for talking to the inverter. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.

What to check before ordering

The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

  • Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.
  • Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.
  • Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.
  • Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.

Common mistakes

  • Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
  • Mixing old and new batteries, or different chemistries, in one bank. The weakest unit drags the whole bank down and can be damaged by the others.
  • Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.

Price and availability in Pakistan

SES Power 5.12kWH IP20  Lithium Ion Battery Power Wall 51.2V 100Ah is listed at ₨ 240,000 (PKR) for Pakistan. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Pakistan: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports SES Power Battery locally before ordering.

SES Power 5.12kWH IP20  Lithium Ion Battery Power Wall 51.2V 100Ah — frequently asked questions

How much does SES Power 5.12kWH IP20  Lithium Ion Battery Power Wall 51.2V 100Ah cost?

SES Power 5.12kWH IP20  Lithium Ion Battery Power Wall 51.2V 100Ah is listed at ₨ 240,000 (PKR) for Pakistan. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

What are the specifications of SES Power 5.12kWH IP20  Lithium Ion Battery Power Wall 51.2V 100Ah?

We hold 8 published specifications for this battery, including charge voltage 56.16v, watts 5120WH, discharge current 100A, rated voltage 51.2V and charge current 100A. The full table is on this page, listed under model SESR-01.

Who makes SES Power 5.12kWH IP20  Lithium Ion Battery Power Wall 51.2V 100Ah?

SES Power 5.12kWH IP20  Lithium Ion Battery Power Wall 51.2V 100Ah is a SES Power Battery product, listed under batteries with model reference SESR-01. The SES Power Battery brand page lists the rest of its range so you can compare across the catalogue.

Is SES Power 5.12kWH IP20  Lithium Ion Battery Power Wall 51.2V 100Ah right for my system?

That depends on what it has to connect to. For a battery, check continuous charge and discharge current, which limits how much power you can draw from the pack, cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4 and round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid against the rest of your equipment before price enters the decision. Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.

Where can I buy SES Power 5.12kWH IP20  Lithium Ion Battery Power Wall 51.2V 100Ah in Pakistan?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Pakistan — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.

Write a Review

Share your experience — no account needed.

Your rating *

Related Products