Batteries

DYNESS LITHIUM ION BATTERY 12.8V 100AH

₨ 63,000PKR · price may vary

Specifications: 5

Capacity100Ah (1280Wh / 1.28kWh)
ChemistryLiFePO4/LFP
Cycle Life3,000 cycles
VoltageNominal 12.8V
Weight12 kg

Overview

The selected region shows the Dyness AR1.2 LFP 12.8V Lithium-ion Battery, a high-performance energy storage solution designed as a direct replacement for traditional lead-acid batteries. Features:Model: AR1.2Chemistry: Lithium Iron Phosphate (LiFePO4/LFP), known for safety and s

Specifications

General Specification
Capacity	100Ah (1280Wh / 1.28kWh)
Chemistry	LiFePO4/LFP
Cycle Life	3,000 cycles
Voltage	Nominal 12.8V
Weight	12 kg

What these specifications mean

DYNESS LITHIUM ION BATTERY 12.8V 100AH is listed with 5 published specifications from Dyness, including capacity of 100Ah (1280Wh / 1.28kWh), chemistry of LiFePO4/LFP, cycle life of 3,000 cycles and voltage of Nominal 12.8V. Those figures are what decide whether this unit fits your system, so read them against the equipment it will connect to before comparing price.

For a battery, the figures that matter most are communication protocol (CAN or RS485) for talking to the inverter, nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh), usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50% and system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.

Choosing a battery: the checks that matter

The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Check the continuous discharge rating against your inverter. A battery that stores plenty of energy but can only deliver 50 A cannot support a large inverter at full output.
Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.
Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.
Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.

Where buyers lose money

Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
Mixing old and new batteries, or different chemistries, in one bank. The weakest unit drags the whole bank down and can be damaged by the others.
Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.

Price and availability in Pakistan

DYNESS LITHIUM ION BATTERY 12.8V 100AH is listed at ₨ 63,000 (PKR) for Pakistan. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Pakistan: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Dyness locally before ordering.

DYNESS LITHIUM ION BATTERY 12.8V 100AH — frequently asked questions

How much does DYNESS LITHIUM ION BATTERY 12.8V 100AH cost?

DYNESS LITHIUM ION BATTERY 12.8V 100AH is listed at ₨ 63,000 (PKR) for Pakistan. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

What are the specifications of DYNESS LITHIUM ION BATTERY 12.8V 100AH?

We hold 5 published specifications for this battery, including capacity 100Ah (1280Wh / 1.28kWh), chemistry LiFePO4/LFP, cycle life 3,000 cycles, voltage Nominal 12.8V and weight 12 kg. The full table is on this page.

Who makes DYNESS LITHIUM ION BATTERY 12.8V 100AH?

DYNESS LITHIUM ION BATTERY 12.8V 100AH is a Dyness product, listed under batteries. The Dyness brand page lists the rest of its range so you can compare across the catalogue.

Is DYNESS LITHIUM ION BATTERY 12.8V 100AH right for my system?

That depends on what it has to connect to. For a battery, check communication protocol (CAN or RS485) for talking to the inverter, nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh) and usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50% against the rest of your equipment before price enters the decision. Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.

Where can I buy DYNESS LITHIUM ION BATTERY 12.8V 100AH in Pakistan?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Pakistan — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.