Charge Controllers

Loom Solar - Fusion 1012 charge controller - 10 amps for Lithium batteries

₹ 1,100INR · price may vary

Model: Lithium - 10 amps
Specifications: 0

Overview

Product summary

Solar Charge Controller is must to have in a off grid system, It protects batteries from deep discharge and over charge by regulating the power coming from Solar panels and controlling power output. It also comes with a facility of running DC Load.

Loom Solar introduced PWM based Solar charge controller with LED display, USB charging Option & dusk to dawn feature. Dusk and down feature is used in street light application where lights is switched off in the morning and Automatically it turns on in the evening. This is the first charge controller in India made specifically to charge Lithium batteries used in Home and street lights.

Product Video

Descriptions

Model Name

Fusion 1012

Manufacturer warranty

12 months

Maximum Charging current

10 Amp

Output

12.8 Volt DC

Panel Support

250 Wp @ 12V

Features

0.5 Amp / 5 Volt USB port for Mobile charging

Load controller with LVD & dusk to dawn feature

Made for Lithium batteries, Does not support lead acid batteries.

Protections

Short - Circuit

Overload

Reverse Connection

Low Battery Discharge

High Battery charge

Indications

Battery Charging- Yellow LED blinking

Low Battery – Red LED on

Battery Full Charged – Yellow LED stable

Reverse Connection, Error – Red LED on

Download product user manual. to understand detailed technical product information and how to install it.

Reading the specifications

Detailed specifications for Loom Solar - Fusion 1012 charge controller - 10 amps for Lithium batteries have not been published yet. Loom Solar lists this charge controller in the Charge Controllers, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a charge controller, the figures that matter most are type: MPPT or PWM, rated charge current in amps, which must exceed the array's short-circuit current with margin, maximum PV open-circuit voltage, the hard limit that must survive cold-morning Voc rise and supported battery voltages (12/24/36/48 V) and chemistries. In any system with a battery and a separate array, the controller is what protects the most expensive component and determines how much of the array's output actually reaches storage.

What to check before ordering

The checks below apply to any charge controller. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Prefer a unit with temperature compensation or a battery temperature sensor if the bank lives somewhere that gets hot or cold.
Choose MPPT over PWM for anything beyond a very small array. An MPPT controller harvests roughly 20–30% more energy because it converts excess panel voltage into charge current instead of throwing it away.
Size the current rating from array watts divided by battery voltage, then add at least 25% margin for cold, bright conditions where panels exceed their rated output.
Check the maximum PV input voltage against the array's Voc at your coldest expected temperature, not at 25 °C — Voc rises as temperature falls, and exceeding the limit destroys the controller instantly.

Common mistakes

Sizing on rated array watts alone and ignoring the voltage ceiling, which is the most common way controllers are killed.
Using a PWM controller with a high-voltage grid-tie panel — the voltage mismatch wastes a large share of the panel's output.
Running the load output beyond its rating instead of wiring heavy loads directly to the battery through a fuse.

Price and availability in India

Loom Solar - Fusion 1012 charge controller - 10 amps for Lithium batteries is listed at ₹ 1,100 (INR) for India. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in India: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Loom Solar locally before ordering.

Loom Solar - Fusion 1012 charge controller - 10 amps for Lithium batteries — frequently asked questions

How much does Loom Solar - Fusion 1012 charge controller - 10 amps for Lithium batteries cost?

Loom Solar - Fusion 1012 charge controller - 10 amps for Lithium batteries is listed at ₹ 1,100 (INR) for India. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes Loom Solar - Fusion 1012 charge controller - 10 amps for Lithium batteries?

Loom Solar - Fusion 1012 charge controller - 10 amps for Lithium batteries is a Loom Solar product, listed under charge controllers with model reference Lithium - 10 amps. The Loom Solar brand page lists the rest of its range so you can compare across the catalogue.

Is Loom Solar - Fusion 1012 charge controller - 10 amps for Lithium batteries right for my system?

That depends on what it has to connect to. For a charge controller, check type: MPPT or PWM, rated charge current in amps, which must exceed the array's short-circuit current with margin and maximum PV open-circuit voltage, the hard limit that must survive cold-morning Voc rise against the rest of your equipment before price enters the decision. Size the current rating from array watts divided by battery voltage, then add at least 25% margin for cold, bright conditions where panels exceed their rated output.

Where can I buy Loom Solar - Fusion 1012 charge controller - 10 amps for Lithium batteries in India?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in India — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.