Charge Controllers

Loom Solar- Fusion 2024 charge controller - 20 amp, 12-24V

₹ 1,500INR · price may vary

Model: Loom 20 amps
Specifications: 0

Overview

Product summary

Solar Charge Controller is required for two purposes

1) To run DC lights, Fan and Mobile charging from Solar panel and battery

2) To Charge Inverter/ Auto Battery from Solar panel.

Product Video

Descriptions

Capacity

20 Amps

Battery Voltage support

12 Volt / 24 Volt DC

Technology

PWM

Solar Panel Support

250 Wp @ 12V and 500 Wp @ 24 V

Mobile Charging

Yes, USB 0.5 amps 5 Volt

Automatic Lights on during the night

Yes, Dusk and Down Feature

Protections

Short - Circuit

Overload

Reverse Connection

Low Battery Discharge

High Battery charge

LED Indications

Battery Charging- Yellow LED blinking

Low Battery – Red LED on

Battery Full Charged – Yellow LED stable

Reverse Connection, Error – Red LED on

Download product user manual and Datasheet to understand detailed product information and how to install it.

How to read this datasheet

Detailed specifications for Loom Solar- Fusion 2024 charge controller - 20 amp, 12-24V have not been published yet. Loom Solar lists this charge controller in the Charge Controllers, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a charge controller, the figures that matter most are maximum PV open-circuit voltage, the hard limit that must survive cold-morning Voc rise, supported battery voltages (12/24/36/48 V) and chemistries, conversion efficiency, typically 96–99% for a good MPPT unit and whether it offers a load output, temperature compensation and remote monitoring. In any system with a battery and a separate array, the controller is what protects the most expensive component and determines how much of the array's output actually reaches storage.

What to check before ordering

The checks below apply to any charge controller. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Confirm the controller supports your battery chemistry with the right charge profile. Lithium, AGM, gel and flooded batteries need different absorption and float voltages.
Prefer a unit with temperature compensation or a battery temperature sensor if the bank lives somewhere that gets hot or cold.
Choose MPPT over PWM for anything beyond a very small array. An MPPT controller harvests roughly 20–30% more energy because it converts excess panel voltage into charge current instead of throwing it away.
Size the current rating from array watts divided by battery voltage, then add at least 25% margin for cold, bright conditions where panels exceed their rated output.

Common mistakes

Sizing on rated array watts alone and ignoring the voltage ceiling, which is the most common way controllers are killed.
Using a PWM controller with a high-voltage grid-tie panel — the voltage mismatch wastes a large share of the panel's output.
Running the load output beyond its rating instead of wiring heavy loads directly to the battery through a fuse.

Price and availability in India

Loom Solar- Fusion 2024 charge controller - 20 amp, 12-24V is listed at ₹ 1,500 (INR) for India. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in India: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Loom Solar locally before ordering.

Loom Solar- Fusion 2024 charge controller - 20 amp, 12-24V — frequently asked questions

How much does Loom Solar- Fusion 2024 charge controller - 20 amp, 12-24V cost?

Loom Solar- Fusion 2024 charge controller - 20 amp, 12-24V is listed at ₹ 1,500 (INR) for India. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes Loom Solar- Fusion 2024 charge controller - 20 amp, 12-24V?

Loom Solar- Fusion 2024 charge controller - 20 amp, 12-24V is a Loom Solar product, listed under charge controllers with model reference Loom 20 amps. The Loom Solar brand page lists the rest of its range so you can compare across the catalogue.

Is Loom Solar- Fusion 2024 charge controller - 20 amp, 12-24V right for my system?

That depends on what it has to connect to. For a charge controller, check type: MPPT or PWM, rated charge current in amps, which must exceed the array's short-circuit current with margin and maximum PV open-circuit voltage, the hard limit that must survive cold-morning Voc rise against the rest of your equipment before price enters the decision. Check the maximum PV input voltage against the array's Voc at your coldest expected temperature, not at 25 °C — Voc rises as temperature falls, and exceeding the limit destroys the controller instantly.

Where can I buy Loom Solar- Fusion 2024 charge controller - 20 amp, 12-24V in India?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in India — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.