Batteries

CAML 10.24 kWh (200Ah, 51.2V) LiFePO4 Battery - Wall Mount

₹ 230,000INR · price may vary

Specifications: 0

Overview

CAML LiFePO4 (Lithium Iron Phosphate) Wall-Mount battery is designed to offer both space efficiency and high performance. CAML 51.2 V 200 Ah Lithium-ion battery provides a Battery Management System (BMS) compatible with various inverters available in the market. It offers a remarkable 6000 charge cycles and fast charging capabilities, allowing the battery to charge fully in just 2-3 hours. This lithium battery is easy to maintain and carry and also offers a space-saving storage solution, ideal for both domestic and commercial applications. Its durability, long lifespan, and performance make it a superior choice over traditional Lead-Acid SMF batteries. This battery operates efficiently in a wide temperature range and weighs almost one-quarter of traditional SMF and Lead-Acid batteries. Additionally, the system is expandable and supports parallel configuration to increase battery bank capacity.

Fast Charging - Battery gets fully charged 100% in just 2-3 hours.

Longer life - Compared to Lead acid and SMF, Lithium battery has 6,000+ cycles. life, which translates into 10-15 years of usable life.

Lightweight - The weight of a lithium battery is 1/4 that of Other comparable batteries, such as SMF and lead acid batteries.

Zero Maintenance- Free, no memory effect.

Expandable - Battery bank Expandable in parallel.

Safe - Safest battery with modular design.

Temperature Range - Wide operating temperature range.

Installation - Quick and Easy Installation.

Features

Applications

Technical Specifications

Manufacturer

Loom Solar

Rated Capacity

1024 Wh / 51.2 V / 200 Ah

Voltage

51.2 V

Charging Cut-off Voltage

56.16 V

Recommend Charge Current

0.2 C, 20 A

Max. Charge Current

0°-15°C: 20 A, 15°-45°C: 50 A

Operating Temperature Range

-20°C to 65°C

Environment

Indoor

Max. Output Power

10 kWh

Installation

Wall-Mount

Model Number

CAML 20051-WM

Communication Port

CAN / RS-485 / RS-432 for Inverter Communication

Protection Class

IP65

Grid connection

Off-grid, Hybrid grid

Product name

CAML Wall-Mount Lithium-ion Battery

Cell Technology

Lithium Iron Phosphate (LiFePO4)

Cycle life

6000 Times @ 80% DoD

Warranty

5-year

Protection

Smart BMS Protection with Communication

Efficiency

98%

Certifications

UN38.3, RoHS, MSDS, CE

Service

Free Replacement Parts Service - Enjoy free replacement parts service and online technical support for 1 year after purchase.

Caution📢

Do not throw batteries into the fire.

Do not short-circuit.

Do not heat or disassemble batteries.

Never keep batteries near sources or in high temperatures.

Read the application's instruction manual carefully before use.

Charging the battery with 50A constant until 56.16V at room temperature 20 degrees C+/-5 degrees C.

Warning⚠️

DANGER! Chemical Hazard & Shock Hazard

Do not disassemble or repair the battery by yourself.

Do not drop, deform, impact, cut, or spear the battery with a sharp object.

Do not apply strong pressure to the batteries or handle them roughly.

Keep batteries away from direct sunlight, high temperatures, and high humidity.

Please keep the battery away from liquid.

Keep batteries out of reach of children.

If you notice signs that the battery has a problem, such as overheating, odour, leaks, bulging, or a change in colour/shape, shut off the device and move it away from anything that can catch on fire.

Avoid charging or storing batteries at high temperatures. High temperatures might ignite the battery and cause a fire.

Danger❗

Do not parallel connect with different batteries.

Do not connect the battery to AC power directly.

Do not connect the battery to PV wiring directly.

Do not connect batteries in series.

Do not connect the battery to a faulty or unqualified inverter or charger.

Do not place the battery near an open flame or flammable material.

Do not place the battery in a child or pet-touchable area

Do not short-circuit the external connection.

Do not place the battery under direct sunlight.

Warning⚠️

Recharge the battery every six months.

Recharge the battery within 10 days after the battery is fully discharged.

Please engage the correct multiple batteries based on the inverter's maximum charge and discharge current.

Make sure the grid power is cut off and the battery is powered off before installation.

Make sure the earthing cable is connected correctly before operation.

Power off the battery and disconnect the power connections before maintenance

Shipping Details

Net Weight / Gross Weight

98 kg/106 kg

Dimensions (L x W x D)

800 x 590 x 142 mm

Download

Download the CAML 20051-WM Datasheet and User Manual

Load Calculator

Calculate your power consumption with our load calculator tool.

Reading the specifications

Detailed specifications for CAML 10.24 kWh (200Ah, 51.2V) LiFePO4 Battery - Wall Mount have not been published yet. Loom Solar lists this battery in the Batteries, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a battery, the figures that matter most are cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4, round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid, communication protocol (CAN or RS485) for talking to the inverter and nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh). Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.

Before you buy a battery

The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.
Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.
Check the continuous discharge rating against your inverter. A battery that stores plenty of energy but can only deliver 50 A cannot support a large inverter at full output.
Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.

Where buyers lose money

Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.
Installing lithium packs in an unventilated, hot enclosure. Sustained high temperature is the fastest way to lose cycle life.
Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.

Price and availability in India

CAML 10.24 kWh (200Ah, 51.2V) LiFePO4 Battery - Wall Mount is listed at ₹ 230,000 (INR) for India. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in India: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Loom Solar locally before ordering.

CAML 10.24 kWh (200Ah, 51.2V) LiFePO4 Battery - Wall Mount — frequently asked questions

How much does CAML 10.24 kWh (200Ah, 51.2V) LiFePO4 Battery - Wall Mount cost?

CAML 10.24 kWh (200Ah, 51.2V) LiFePO4 Battery - Wall Mount is listed at ₹ 230,000 (INR) for India. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes CAML 10.24 kWh (200Ah, 51.2V) LiFePO4 Battery - Wall Mount?

CAML 10.24 kWh (200Ah, 51.2V) LiFePO4 Battery - Wall Mount is a Loom Solar product, listed under batteries. The Loom Solar brand page lists the rest of its range so you can compare across the catalogue.

Is CAML 10.24 kWh (200Ah, 51.2V) LiFePO4 Battery - Wall Mount right for my system?

That depends on what it has to connect to. For a battery, check system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack, continuous charge and discharge current, which limits how much power you can draw from the pack and cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4 against the rest of your equipment before price enters the decision. Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.

Where can I buy CAML 10.24 kWh (200Ah, 51.2V) LiFePO4 Battery - Wall Mount in India?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in India — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.