Batteries

CAML 50 Ah, 204.8 V / 10 kWh High-Voltage Stackable Lithium Battery

₹ 275,000INR · price may vary

Specifications: 0

Overview

The CAML 50 Ah, 204.8 V High-Voltage Lithium Battery from Loom Solar with a high-voltage Battery Management System (BMS) is the ultimate solution for high energy demands, making it perfect for restaurants, hotels, hospitals, and large homes. It provides an impressive lifespan of up to 6000 charge cycles, ensuring long-lasting performance. The battery gets fully charged in only 2-3 hours due to its fast-charging capabilities. It is easy to maintain, lightweight, and offers a space-saving solution, making it suitable for domestic and commercial purposes. BMS is compatible with various inverters in the market, including Growatt, Goodwe, Deye, Luxpower, Voltronics, etc., which have transfer-less hybrid inverters. This lithium battery offers a longer lifespan and higher durability, and weighs almost ¼ of other SMF and Lead-Acid batteries.

Scalable Modular Design: This design supports easy system expansion by connecting multiple battery units in parallel. It is suitable for growing energy demands in residential, commercial, or industrial settings.

Easy for Installation: Compact, stackable design for quick and clean setup. Standard connectors and layout reduce installation time and effort.

Multiple Communication: Integrated CAN, RS-485, interfaces for inverter and energy management system (EMS) integration. Enables real-time data monitoring, system control, and diagnostics.

20 Years+ Lifespan: Designed to last over 6000 charge cycles at 80% usage,

providing reliable performance with very little loss over time.

Advanced Battery Management System: Monitors temperature, voltage, and current to ensure safety and balanced charging. Provides reliable protection and optimal performance.

Features

Applications

Technical Specifications

Manufacturer

Loom Solar

Rated Capacity

2550 Wh / 51.2 V / 50 Ah

Voltage

51.2 V

Charging Cut-off Voltage

56.16 V

Recommend Charge Current

25 A

Max. Continuous Charge / Discharge Current

0°~15°C: 20 A, 15°~ 45°C: 50 A

Peak Current

100 A

Display

The information about the battery, such as SOC

Communication Port

CAN / RS-485 for Inverter Communication

Installation

Wall-Mount

Model Number

CAML 5051-WM LV

Maximum Parallel Support

4 Cluster (3 to 10 units per cluster)

Charge / Discharge Temperature

0°C ~ 55°C

Environment

Indoor/outdoor Under Roof (Avoid Direct Sunlight)

Relative Humidity

-20% ~ 60%

Cooling

Natural Convection

Protection Class

IP65

Grid connection

Off-grid, Hybrid grid

Product name

CAML Wall-Mount Lithium-ion Battery

Cell Technology

Lithium Iron Phosphate (LiFePO4)

Cycle life

6000 Times @ 80% DoD

Warranty

5-year

Protection

Smart BMS Protection with Communication

Efficiency

98%

Note: Specifications refer to a single module of 2.5 kWh (2550 Wh). The complete set includes 4 modules, totaling 10.2 kWh.

Shipping Details

Weight

High-Voltage Box:14 kg

Battery Box: 28 kg

Dimensions (mm)

High-Voltage Box: 750 x 210 x 250

Battery Box: 750 x 210 x 145

Certifications

UN38.3, RoHS, MSDS, CE

Download

Download the CAML 5051 High-Voltage Series Datasheet and User Manual from here.

How to read this datasheet

Detailed specifications for CAML 50 Ah, 204.8 V / 10 kWh High-Voltage Stackable Lithium Battery have not been published yet. Loom Solar lists this battery in the Batteries, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a battery, the figures that matter most are usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50%, system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack, continuous charge and discharge current, which limits how much power you can draw from the pack and cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.

Before you buy a battery

The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.
Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.
Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.
Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.

What people get wrong

Installing lithium packs in an unventilated, hot enclosure. Sustained high temperature is the fastest way to lose cycle life.
Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
Mixing old and new batteries, or different chemistries, in one bank. The weakest unit drags the whole bank down and can be damaged by the others.

Price and availability in India

CAML 50 Ah, 204.8 V / 10 kWh High-Voltage Stackable Lithium Battery is listed at ₹ 275,000 (INR) for India. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in India: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Loom Solar locally before ordering.

CAML 50 Ah, 204.8 V / 10 kWh High-Voltage Stackable Lithium Battery — frequently asked questions

How much does CAML 50 Ah, 204.8 V / 10 kWh High-Voltage Stackable Lithium Battery cost?

CAML 50 Ah, 204.8 V / 10 kWh High-Voltage Stackable Lithium Battery is listed at ₹ 275,000 (INR) for India. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes CAML 50 Ah, 204.8 V / 10 kWh High-Voltage Stackable Lithium Battery?

CAML 50 Ah, 204.8 V / 10 kWh High-Voltage Stackable Lithium Battery is a Loom Solar product, listed under batteries. The Loom Solar brand page lists the rest of its range so you can compare across the catalogue.

Is CAML 50 Ah, 204.8 V / 10 kWh High-Voltage Stackable Lithium Battery right for my system?

That depends on what it has to connect to. For a battery, check cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4, round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid and communication protocol (CAN or RS485) for talking to the inverter against the rest of your equipment before price enters the decision. Check the continuous discharge rating against your inverter. A battery that stores plenty of energy but can only deliver 50 A cannot support a large inverter at full output.

Where can I buy CAML 50 Ah, 204.8 V / 10 kWh High-Voltage Stackable Lithium Battery in India?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in India — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.