Batteries

CAML 125kW/261kWh All-in-One BESS for C&I Applications

₹ 6,000,000INR · price may vary

Model: CAML125kW_261KWh BESS
Specifications: 0

Overview

Loom introduces the CAML C&I BESS Solution, with capacities starting from 125 kW AC and 261 kWh DC, providing a 2-hour power backup solution. It is an all-in-one, liquid-cooled Battery Energy Storage System that can be expanded up to 1 MWh for commercial and industrial applications. It is a highly integrated LiFePO4 battery, BMS, PCS, EMS, STS, fire protection system, temperature control system and cloud platform. The energy storage system adtops integrated innovative design, with higher safety standards, easier management and higher benefits. This system is suitable for manufacturing plants, showrooms, hospitals, hotels, marriage halls, rice mills, cold storage facilities, ground-mounted solar power plants, and more.

Key Features

Highly integrated battery, BMS, PCS, EMS, STS, fire protection, temprature control and other systems

Standardized and modular design, plug-and-pay, building block expansion

Full coverage of application scenarios, supporting AC three-phase three-wire and three-phase four-wire

Supports on-grid and off-grid applications, with PQ, VF, VSG, contant DC voltage and other operating modes

With primary frequency modulation function

With three-phase 100% unbalanced load

Support black start, anti-back flow, overload protection and other functions

Support Ethernet and wireless communication

Product Video

System Details

Nominal capacity

261kWh

Nominal output power

125kW

Battery cycle time

> 6000 times (>45°C)

Protection level

-25°C ~ +50°C (>45°C Derating)

Cooling method

Aerosol

Altitude

≤4000m (>2000m Derating)

Dimension

1100*1500*2100mm

Weight

~2800kg

AC (on-grid)

Nominal power

125kW

Nominal voltage

400V

Nominal current

180A

Nominal frequency

50Hz/60Hz

Power factor

-1~1

AC access method

3W/3W+N

Overload capacity

1.1times (long term), 1.2times (1min)

DC battery

Cell type

LFP3.2V/314Ah

Battery system configuration

261kWh/1P260S

Maximum charge/ discharge power

150kW

Nominal voltage

832V

Battery voltage range

728V-936V

AC (off-grid) (optional)

Max power of important load

137.5kW

Nominal voltage

400V

Nominal frequency

50Hz/60Hz

Long term overload capacity

110%

On-grid and off-grid switching time

<20mS

MPPT module (2 pcs, optional)

Nominal power

4*15kW

Max MPPT current (PV side)

4*37.5A

Max short-circuit current (PV side)

4*50A

Nominal voltage (PV side)

450V

Max open circuit voltage (PV side)

650V

Voltage range (PV side)

200V~650V

Max current (battery side)

110A

Nominal current (battery side)

830V

Voltage range (battery side)

650V~1000V

Download datasheet from here.

For more details, speak with our BESS expert, Mr. Nishi Chandra, at 9650443724 or email nishi@loomsolar.com

What these specifications mean

Detailed specifications for CAML 125kW/261kWh All-in-One BESS for C&I Applications have not been published yet. Loom Solar lists this battery in the Batteries, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a battery, the figures that matter most are system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack, continuous charge and discharge current, which limits how much power you can draw from the pack, cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4 and round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.

Before you buy a battery

The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.
Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.
Check the continuous discharge rating against your inverter. A battery that stores plenty of energy but can only deliver 50 A cannot support a large inverter at full output.
Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.

Common mistakes

Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
Mixing old and new batteries, or different chemistries, in one bank. The weakest unit drags the whole bank down and can be damaged by the others.
Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.

Price and availability in India

CAML 125kW/261kWh All-in-One BESS for C&I Applications is listed at ₹ 6,000,000 (INR) for India. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in India: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Loom Solar locally before ordering.

CAML 125kW/261kWh All-in-One BESS for C&I Applications — frequently asked questions

How much does CAML 125kW/261kWh All-in-One BESS for C&I Applications cost?

CAML 125kW/261kWh All-in-One BESS for C&I Applications is listed at ₹ 6,000,000 (INR) for India. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes CAML 125kW/261kWh All-in-One BESS for C&I Applications?

CAML 125kW/261kWh All-in-One BESS for C&I Applications is a Loom Solar product, listed under batteries with model reference CAML125kW_261KWh BESS. The Loom Solar brand page lists the rest of its range so you can compare across the catalogue.

Is CAML 125kW/261kWh All-in-One BESS for C&I Applications right for my system?

That depends on what it has to connect to. For a battery, check round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid, communication protocol (CAN or RS485) for talking to the inverter and nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh) against the rest of your equipment before price enters the decision. Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.

Where can I buy CAML 125kW/261kWh All-in-One BESS for C&I Applications in India?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in India — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.