Batteries
Batteries
Brandsolago
Anker Solix BP2700 – 2,7kWh Erweiterungsakku für Anker SOLIX 3 Pro
€ 699EUR · price may vary
Brandsolago- Model
- 300.301.012
- Specifications
- 0
Overview
Anker Solix BP2700 Erweiterungsakku ▷ Zusatz-Akku für Solarbank-Systeme ✓ 2,688 kWh Kapazität ✓ Bis zu 16,1 kWh Speicher ✓ IP65 ✓ Jetzt bei solago bestellen.
What these specifications mean
Detailed specifications for Anker Solix BP2700 – 2,7kWh Erweiterungsakku für Anker SOLIX 3 Pro have not been published yet. solago lists this battery in the Batteries, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.
For a battery, the figures that matter most are round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid, communication protocol (CAN or RS485) for talking to the inverter, nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh) and usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50%. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.
Choosing a battery: the checks that matter
The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.
- Check the continuous discharge rating against your inverter. A battery that stores plenty of energy but can only deliver 50 A cannot support a large inverter at full output.
- Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.
- Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.
- Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.
Common mistakes
- Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.
- Installing lithium packs in an unventilated, hot enclosure. Sustained high temperature is the fastest way to lose cycle life.
- Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
Price and availability in Germany
Anker Solix BP2700 – 2,7kWh Erweiterungsakku für Anker SOLIX 3 Pro is listed at € 699 (EUR) for Germany. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.
SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Germany: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports solago locally before ordering.
Anker Solix BP2700 – 2,7kWh Erweiterungsakku für Anker SOLIX 3 Pro — frequently asked questions
How much does Anker Solix BP2700 – 2,7kWh Erweiterungsakku für Anker SOLIX 3 Pro cost?
Anker Solix BP2700 – 2,7kWh Erweiterungsakku für Anker SOLIX 3 Pro is listed at € 699 (EUR) for Germany. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.
Who makes Anker Solix BP2700 – 2,7kWh Erweiterungsakku für Anker SOLIX 3 Pro?
Anker Solix BP2700 – 2,7kWh Erweiterungsakku für Anker SOLIX 3 Pro is a solago product, listed under batteries with model reference 300.301.012. The solago brand page lists the rest of its range so you can compare across the catalogue.
Is Anker Solix BP2700 – 2,7kWh Erweiterungsakku für Anker SOLIX 3 Pro right for my system?
That depends on what it has to connect to. For a battery, check system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack, continuous charge and discharge current, which limits how much power you can draw from the pack and cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4 against the rest of your equipment before price enters the decision. Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.
Where can I buy Anker Solix BP2700 – 2,7kWh Erweiterungsakku für Anker SOLIX 3 Pro in Germany?
SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Germany — buying in-channel is what keeps the manufacturer's warranty valid.
Reviews
No reviews yet
Be the first to review this product.
Write a Review
Share your experience — no account needed.
