Batteries

Simpliphi PHI 2.7 kWh LFP Battery, 24V | PHI-2.7-24-60

$ 2,129.03USD · price may vary

Model: PHI-2.7-24-60
Specifications: 0

Overview

DETAILS

The PHI 2.7™ kWh 60 Amp deep-cycle Lithium Ferro Phosphate (LFP) battery is optimized with proprietary cell architecture, power electronics, BMS and assembly methods. It is modular, lightweight and scalable for installations that range from kWh to MWh. Provides power security and seamless integration of renewable and traditional sources of energy in conjunction with or independent of the grid: net zero, peak shaving, emergency back-up, portable and mobile.

FEATURES:

Built-in accessible 80 Amp DC breaker On/Off switch – increases safety and simplifies installations

24V and 48V LFP batteries with proprietary architecture and Battery Management System (BMS)—do not require ventilation, cooling or thermal regulation

Compatible with all industry standard inverter/charge controllers

Drop in replacement for lead acid

LFP is the safest, most environmentally benign Lithium Ion chemistry available—no risk of thermal runaway or fire

No AC or toxic liquid cooling—negligible parasitic drain —long cycle life

Non-toxic and non-hazardous recyclable materials

TECHNICAL SPECIFICATIONS:

SKU

PHI-2.7-24-60

Weight

81.000000

Dimensions (inchs)

11.25 x 11 x 9.5

Manufacturer

Simpliphi

class

What these specifications mean

Detailed specifications for Simpliphi PHI 2.7 kWh LFP Battery, 24V | PHI-2.7-24-60 have not been published yet. Simpliphi lists this battery in the Batteries, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a battery, the figures that matter most are cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4, round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid, communication protocol (CAN or RS485) for talking to the inverter and nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh). Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.

What to check before ordering

The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.
Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.
Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.
Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.

What people get wrong

Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
Mixing old and new batteries, or different chemistries, in one bank. The weakest unit drags the whole bank down and can be damaged by the others.
Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.

Price and availability in Canada

Simpliphi PHI 2.7 kWh LFP Battery, 24V | PHI-2.7-24-60 is listed at $ 2,129 (USD) for Canada. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Canada: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Simpliphi locally before ordering.

Simpliphi PHI 2.7 kWh LFP Battery, 24V | PHI-2.7-24-60 — frequently asked questions

How much does Simpliphi PHI 2.7 kWh LFP Battery, 24V | PHI-2.7-24-60 cost?

Simpliphi PHI 2.7 kWh LFP Battery, 24V | PHI-2.7-24-60 is listed at $ 2,129 (USD) for Canada. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes Simpliphi PHI 2.7 kWh LFP Battery, 24V | PHI-2.7-24-60?

Simpliphi PHI 2.7 kWh LFP Battery, 24V | PHI-2.7-24-60 is a Simpliphi product, listed under batteries with model reference PHI-2.7-24-60. The Simpliphi brand page lists the rest of its range so you can compare across the catalogue.

Is Simpliphi PHI 2.7 kWh LFP Battery, 24V | PHI-2.7-24-60 right for my system?

That depends on what it has to connect to. For a battery, check nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh), usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50% and system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack against the rest of your equipment before price enters the decision. Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.

Where can I buy Simpliphi PHI 2.7 kWh LFP Battery, 24V | PHI-2.7-24-60 in Canada?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Canada — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.