Batteries

Bluetti B80P 806Wh Expansion Battery

$ 599USD · price may vary

Model: P-B80P-US-GY-BL-010
Specifications: 0

Overview

Bluetti B80P 806Wh Expansion Battery

Made to Withstand and Last

The BLUETTI B80P is built with reliable LiFePO4 battery cells for a lifespan of over 10 years. It's IP65-rated to resist water and dust, so you can keep going in all weather. Backed by an industry-leading 6-year warranty, you can always enjoy peace of mind.

Capacity Booster for BLUETTI Power Stations

Besides being the perfect companion for the BLUETTI AC60P, the B80P also expands the capacity of many other BLUETTI portable power stations such as the EB3A, EB55, EB70S, and AC180P in Power Bank mode*.

*Additional accessories required.

SPECIFICATIONS

Battery: LiFePO4

Capacity: 806Wh

Charging Temperature: 0°C to 40°C (32°F to 104°F)

Discharging Temperature: -20°C to 40°C (-4°F to 104°F)

Dimension: 290 x 200 x 230mm

Net Weight: 9.8kg

DC OUTPUT

Cigarette Lighter Port*1: Power - 120W, Voltage - 12V, Current - 10A

USB-A*1: Output - 18W,5V/3A 9V/2A 12V/1.5A

USB-C*1: Output - 5V/9V/12V/15V/20VDC/3A 20VDC/5A

PV/DC INPUT

Power: 200W

Voltage: 12V-28.8V

Current: 8.2A±0.3A

Still Have Questions About Bluetti B80P Expansion Battery? Give us a call today 1-877-242-2792

Reading the specifications

Detailed specifications for Bluetti B80P 806Wh Expansion Battery have not been published yet. Bluetti lists this battery in the Batteries, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a battery, the figures that matter most are usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50%, system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack, continuous charge and discharge current, which limits how much power you can draw from the pack and cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4. Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.

Before you buy a battery

The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.
Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.
Check the continuous discharge rating against your inverter. A battery that stores plenty of energy but can only deliver 50 A cannot support a large inverter at full output.
Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.

Common mistakes

Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.
Mixing old and new batteries, or different chemistries, in one bank. The weakest unit drags the whole bank down and can be damaged by the others.
Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.

Price and availability in Canada

Bluetti B80P 806Wh Expansion Battery is listed at $ 599 (USD) for Canada. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Canada: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Bluetti locally before ordering.

Bluetti B80P 806Wh Expansion Battery — frequently asked questions

How much does Bluetti B80P 806Wh Expansion Battery cost?

Bluetti B80P 806Wh Expansion Battery is listed at $ 599 (USD) for Canada. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes Bluetti B80P 806Wh Expansion Battery?

Bluetti B80P 806Wh Expansion Battery is a Bluetti product, listed under batteries with model reference P-B80P-US-GY-BL-010. The Bluetti brand page lists the rest of its range so you can compare across the catalogue.

Is Bluetti B80P 806Wh Expansion Battery right for my system?

That depends on what it has to connect to. For a battery, check usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50%, system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack and continuous charge and discharge current, which limits how much power you can draw from the pack against the rest of your equipment before price enters the decision. Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.

Where can I buy Bluetti B80P 806Wh Expansion Battery in Canada?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Canada — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.