Batteries

Anker SOLIX Smart Inlet Box | Manual Whole-Home Backup for E10 | Cut Up to 80% on Bills | NEMA 3R Rated | Plug & Play | Storm Guard Mode

$ 399USD · price may vary

BrandAnker

Model: AS211141
Specifications: 0

Size your system More from Anker

Overview

Easily turn your Anker SOLIX E10 into a full-home backup system with the Smart Inlet Box. Designed for quick, plug-and-play installation, it delivers seamless manual backup power and daily energy savings—all in one rugged, weatherproof unit.

Key Features & Benefits:

Whole-Home Backup, On-Demand:Instantly power your entire home during outages—no circuit limits. Just flip the switch for complete energy independence.

Save Up to 80% on Electricity Bills:Smart modes store and reuse 100% of excess solar and low-cost grid power during peak times—perfect for reducing TOU rates.

Plug & Play Setup:Pre-wired ON-Grid and Backup Power cables plus quick-connect ports mean fast DIY installation with no special tools required.

Weatherproof & Outdoor Ready:NEMA 3R rated for reliable outdoor use in rain, snow, and dust. Operates in extreme temps from -4°F to 131°F.

Built-in Storm Guard Mode:Automatically charges your system to 100% when severe weather is forecasted. Stay prepared with real-time power alerts.

Professional Support, Always:Get expert help through detailed guides, install videos, and live support—or tap into our pre-vetted installer network.

User Manual / Documents:

Anker SOLIX Smart Inlet Box Quick Start Guide

Anker SOLIX E10 & Power Dock & Smart Inlet Box & Smart Generator Datasheet

Reading the specifications

Detailed specifications for Anker SOLIX Smart Inlet Box | Manual Whole-Home Backup for E10 | Cut Up to 80% on Bills | NEMA 3R Rated | Plug & Play | Storm Guard Mode have not been published yet. Anker lists this battery in the Batteries, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a battery, the figures that matter most are cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4, round-trip efficiency, around 90–95% for lithium and 75–85% for lead-acid, communication protocol (CAN or RS485) for talking to the inverter and nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh). Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.

What to check before ordering

The checks below apply to any battery. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.
Check the continuous discharge rating against your inverter. A battery that stores plenty of energy but can only deliver 50 A cannot support a large inverter at full output.
Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.
Read the warranty in full: lithium warranties are stated as a term plus either a cycle count or a total energy throughput, and whichever limit arrives first ends the cover.

Common mistakes

Mixing old and new batteries, or different chemistries, in one bank. The weakest unit drags the whole bank down and can be damaged by the others.
Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.
Installing lithium packs in an unventilated, hot enclosure. Sustained high temperature is the fastest way to lose cycle life.

Price and availability in Canada

Anker SOLIX Smart Inlet Box | Manual Whole-Home Backup for E10 | Cut Up to 80% on Bills | NEMA 3R Rated | Plug & Play | Storm Guard Mode is listed at $ 399 (USD) for Canada. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Canada: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Anker locally before ordering.

Anker SOLIX Smart Inlet Box | Manual Whole-Home Backup for E10 | Cut Up to 80% on Bills | NEMA 3R Rated | Plug & Play | Storm Guard Mode — frequently asked questions

Anker SOLIX Smart Inlet Box | Manual Whole-Home Backup for E10 | Cut Up to 80% on Bills | NEMA 3R Rated | Plug & Play | Storm Guard Mode is listed at $ 399 (USD) for Canada. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Anker SOLIX Smart Inlet Box | Manual Whole-Home Backup for E10 | Cut Up to 80% on Bills | NEMA 3R Rated | Plug & Play | Storm Guard Mode is a Anker product, listed under batteries with model reference AS211141. The Anker brand page lists the rest of its range so you can compare across the catalogue.

That depends on what it has to connect to. For a battery, check nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh), usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50% and system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack against the rest of your equipment before price enters the decision. Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Canada — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.