SolarBazaar

Lantrun

1 product across 1 categories

  • Batteries (1)

Products by Lantrun (1)

1 of 1 products

About Lantrun

There is 1 Lantrun product in the SolarBazaar catalogue, the largest share of them batteries. The listings are structured the same way for every manufacturer, which makes side-by-side comparison across brands straightforward.

All 1 listings sit in a single category, Batteries, so Lantrun is a focused supplier rather than a full-system brand. If you are specifying a complete installation you will be pairing these with equipment from other manufacturers, which makes compatibility checks — voltage, current and communication protocol — worth doing before you commit.

Listed Lantrun products carry a price of ₨ 95,500 (PKR). Prices shown on SolarBazaar are indicative and move with supply, import duties and exchange rates, so treat them as a reference point when comparing brands rather than a quotation.

Across those listings we hold 12 published specifications, including Network Interface, Operation Temperature, operation voltage, Storage temperature and Voltage. Where a manufacturer publishes a figure, it appears on the product page as a field you can compare, rather than being buried in a datasheet.

Understanding Batteries

A solar battery stores the energy your panels generate during the day so it can be used after sunset, during a power cut, or whenever grid electricity is most expensive.

Storage is what turns a solar array from a daytime bill-reducer into a system that covers evening loads and rides through outages. It is normally the single most expensive component, so sizing it correctly matters more than with any other part.

  • communication protocol (CAN or RS485) for talking to the inverter
  • nominal capacity in ampere-hours (Ah) or kilowatt-hours (kWh)
  • usable capacity after depth of discharge — LiFePO4 typically allows 80–100%, lead-acid closer to 50%
  • system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack
  • continuous charge and discharge current, which limits how much power you can draw from the pack

Choosing the right battery for your system

The guidance below applies to any battery, Lantrun's included. Work through it against the specifications listed on this page before you compare prices — a cheaper unit that does not fit your voltages, currents or protocols costs more in the end.

  • Leave room to expand. Packs that parallel cleanly let you add capacity later; ones that do not force a full replacement.
  • Compare usable kilowatt-hours, not nameplate capacity. A 100 Ah lead-acid battery at 12 V is nominally 1.2 kWh but only about 0.6 kWh is safely usable, while a 100 Ah LiFePO4 pack gives you roughly 1.0–1.2 kWh.
  • Size from your evening consumption. Add up what actually runs after sunset for the hours you want covered, then divide by the usable capacity per unit — that number, not the array size, sets how many batteries you need.
  • Check the continuous discharge rating against your inverter. A battery that stores plenty of energy but can only deliver 50 A cannot support a large inverter at full output.
  • Match voltage to the inverter, and confirm the battery appears on the inverter maker's supported list. Closed-loop communication lets the inverter respect the battery's real charge limits instead of guessing.

Where specifications catch people out

  • Sizing the bank for total daily consumption rather than after-dark consumption, which typically doubles the cost for no benefit.
  • Installing lithium packs in an unventilated, hot enclosure. Sustained high temperature is the fastest way to lose cycle life.
  • Ignoring the charge current limit and pairing a large array with a small bank, which trips protection and shortens life.

Buying Lantrun through SolarBazaar

Product availability on SolarBazaar is scoped by country. Choosing your country in the header narrows this page to the Lantrun range listed for that market and quotes prices in its currency.

SolarBazaar is a comparison directory rather than a shop: we publish specifications, prices and documentation so you can shortlist equipment, then buy from a local distributor or installer. That matters for warranty — cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Lantrun in your region before ordering.

If you are still shortlisting, AGS, Anker, Bader Energy and BigBattery are listed in the same category and can be compared against Lantrun spec by spec.

Lantrun — frequently asked questions

How many Lantrun products are listed on SolarBazaar?

1 product, spread across 1 category: 1 batteries. The count reflects what is listed for the country you are browsing, so it changes if you switch country.

What does Lantrun make?

Lantrun's listed range is entirely batteries. A solar battery stores the energy your panels generate during the day so it can be used after sunset, during a power cut, or whenever grid electricity is most expensive.

How much do Lantrun products cost?

Listed Lantrun products are priced at ₨ 95,500 (PKR). Prices are indicative and change with supply and exchange rates — confirm the current figure with a local distributor before ordering.

Is Lantrun a good brand?

SolarBazaar does not rank manufacturers editorially — we publish the specifications so you can judge them against your own requirements. For Lantrun, the practical checks are the system voltage: 12 V, 24 V and 48 V for low-voltage packs, or a high-voltage stack, continuous charge and discharge current, which limits how much power you can draw from the pack and cycle life at a stated depth of discharge, commonly 3,000–6,000 cycles for LiFePO4, and whether the warranty is serviceable in your region. A brand with strong specifications and no local support presence is often the more expensive choice over a system's life.

Where can I buy Lantrun products?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and prices here to shortlist, then buy through an authorised distributor or installer in your country — that route keeps the manufacturer's warranty intact, which direct grey-market imports usually do not.