Solar Panels

ACOPOWER 200 Watts Mono Solar Panel

A$ 318AUD · price may vary

Model: HY200-12MB-1
Specifications: 0

Overview

Dimensions：Size: 58.7×26.8×1.4inches; Weight 26.5 Lbs; 72pcs 5x5 inches high modules conversion efficiency cells

Application： Mainly used for home roof-top, outdoor water pump, solar plants

EASY INSTALLATION: Pre-drilled holes and installation ready; IP65 rated junction box with diodes and 30 inches cable with solar panel connector pre-installed

HIGH QUALITY MECHANICAL PROPERTIES: Guaranteed positive output tolerance (0-3%); withstand high wind-pressure snow load and extreme temperature

Warranty: 25 years of output warranty and 5 years workmanship warranty

How to read this datasheet

Detailed specifications for ACOPOWER 200 Watts Mono Solar Panel have not been published yet. ACOPOWER lists this solar panel in the Solar Panels, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a solar panel, the figures that matter most are module efficiency, typically 19–23% on current products, cell technology — mono PERC, N-type TOPCon, HJT, or bifacial, temperature coefficient of power, usually −0.26 to −0.35 %/°C and first-year and annual degradation, and the performance warranty that guarantees them. Panels are the generating half of the system and the part that determines how much energy is available at all. They are also the longest-lived component, routinely still producing over 80% of their original output after 25 years.

Before you buy a solar panel

The checks below apply to any solar panel. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Compare cost per watt rather than price per panel — a higher-wattage module is often cheaper per watt and needs fewer mounting rails, clamps and cable runs.
Prefer a lower (closer to zero) temperature coefficient in hot climates. Panels lose output as they heat up, and on a 45 °C roof the difference between −0.34 %/°C and −0.29 %/°C is real energy over a year.
Read both warranties. The product warranty (typically 12–15 years, up to 25 on premium modules) covers manufacturing defects; the separate performance warranty guarantees output — commonly 87–92% remaining at year 25.
Check the physical dimensions against your usable roof area before ordering. Modern modules are large, and a layout that works on paper can fail against obstructions, walkways and setback rules.

Common mistakes

Ignoring certification. IEC 61215 and IEC 61730 are the baseline; without them, warranty claims and grid approvals get complicated.
Buying the highest wattage available without checking the inverter's MPPT voltage window — a string that sits outside the window produces less, or nothing.
Assuming rated power is what you will see. Real-world output at midday is typically 75–85% of the nameplate figure after temperature, soiling, wiring and inverter losses.

Price and availability in Australia

ACOPOWER 200 Watts Mono Solar Panel is listed at A$ 318 (AUD) for Australia. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Australia: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports ACOPOWER locally before ordering.

ACOPOWER 200 Watts Mono Solar Panel — frequently asked questions

How much does ACOPOWER 200 Watts Mono Solar Panel cost?

ACOPOWER 200 Watts Mono Solar Panel is listed at A$ 318 (AUD) for Australia. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes ACOPOWER 200 Watts Mono Solar Panel?

ACOPOWER 200 Watts Mono Solar Panel is a ACOPOWER product, listed under solar panels with model reference HY200-12MB-1. The ACOPOWER brand page lists the rest of its range so you can compare across the catalogue.

Is ACOPOWER 200 Watts Mono Solar Panel right for my system?

That depends on what it has to connect to. For a solar panel, check module efficiency, typically 19–23% on current products, cell technology — mono PERC, N-type TOPCon, HJT, or bifacial and temperature coefficient of power, usually −0.26 to −0.35 %/°C against the rest of your equipment before price enters the decision. Prefer a lower (closer to zero) temperature coefficient in hot climates. Panels lose output as they heat up, and on a 45 °C roof the difference between −0.34 %/°C and −0.29 %/°C is real energy over a year.

Where can I buy ACOPOWER 200 Watts Mono Solar Panel in Australia?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Australia — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.