Solar Panels

35 Watt 12 Volt Polycrystalline Solar Panel

A$ 79AUD · price may vary

Model: HY035-12P
Specifications: 0

Overview

19.1% Efficiency – Stable 35W output in low light.

Weatherproof – Durable frame, -40°F to 176°F, wind & snow resistant.

Easy Install – Pre-drilled, fits multiple mount types.

Wide Use – Ideal for 12V batteries, lights, gates, boats, and more.

Warranty – 5-year material, 20-year output.

How to read this datasheet

Detailed specifications for 35 Watt 12 Volt Polycrystalline Solar Panel have not been published yet. ACOPOWER lists this solar panel in the Solar Panels, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a solar panel, the figures that matter most are physical dimensions and weight, which decide what fits your roof and mounting, open-circuit voltage (Voc) and short-circuit current (Isc) for string design, rated power in watt-peak (Wp) measured at standard test conditions and module efficiency, typically 19–23% on current products. Panels are the generating half of the system and the part that determines how much energy is available at all. They are also the longest-lived component, routinely still producing over 80% of their original output after 25 years.

Choosing a solar panel: the checks that matter

The checks below apply to any solar panel. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Keep every panel in a string identical in model and rating. Mismatched modules in one string pull the whole string down to the weakest one.
Compare cost per watt rather than price per panel — a higher-wattage module is often cheaper per watt and needs fewer mounting rails, clamps and cable runs.
Prefer a lower (closer to zero) temperature coefficient in hot climates. Panels lose output as they heat up, and on a 45 °C roof the difference between −0.34 %/°C and −0.29 %/°C is real energy over a year.
Read both warranties. The product warranty (typically 12–15 years, up to 25 on premium modules) covers manufacturing defects; the separate performance warranty guarantees output — commonly 87–92% remaining at year 25.

Where buyers lose money

Underestimating shade. A single shaded cell can suppress an entire string unless you use module-level optimisers or microinverters.
Ignoring certification. IEC 61215 and IEC 61730 are the baseline; without them, warranty claims and grid approvals get complicated.
Buying the highest wattage available without checking the inverter's MPPT voltage window — a string that sits outside the window produces less, or nothing.

Price and availability in Australia

35 Watt 12 Volt Polycrystalline Solar Panel is listed at A$ 79 (AUD) for Australia. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Australia: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports ACOPOWER locally before ordering.

35 Watt 12 Volt Polycrystalline Solar Panel — frequently asked questions

How much does 35 Watt 12 Volt Polycrystalline Solar Panel cost?

35 Watt 12 Volt Polycrystalline Solar Panel is listed at A$ 79 (AUD) for Australia. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes 35 Watt 12 Volt Polycrystalline Solar Panel?

35 Watt 12 Volt Polycrystalline Solar Panel is a ACOPOWER product, listed under solar panels with model reference HY035-12P. The ACOPOWER brand page lists the rest of its range so you can compare across the catalogue.

Is 35 Watt 12 Volt Polycrystalline Solar Panel right for my system?

That depends on what it has to connect to. For a solar panel, check cell technology — mono PERC, N-type TOPCon, HJT, or bifacial, temperature coefficient of power, usually −0.26 to −0.35 %/°C and first-year and annual degradation, and the performance warranty that guarantees them against the rest of your equipment before price enters the decision. Consider N-type TOPCon or bifacial modules where space is tight or the mounting is elevated and reflective — bifacial gains of 5–15% are realistic over a light-coloured flat roof or the ground, and close to zero flush against a dark tile roof.

Where can I buy 35 Watt 12 Volt Polycrystalline Solar Panel in Australia?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Australia — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.