Solar Panels

250W | Short Hard Frame Solar Panel | 22V

A$ 229AUD · price may vary

Model: SHORT-SP250
Specifications: 0

Overview

Our 22V 250W Short Hard Frame Panels are proudly designed and developed in Australia. Built with advanced technology, these panels deliver superior power output and durability to meet your energy needs.

Introducing the all-new 22V 250W Short Hard Frame Panels — a product born from Australian innovation and craftsmanship. Their “short” profile gives you far greater flexibility in where you install them—whether you need to squeeze panels onto tight caravan roofs, along narrow 4WD racks, or around rooftop vents, you can tailor your layout without compromising on performance.

Designed by locals to ensure the highest standards and a tailored understanding of Australian needs, these panels incorporate cutting-edge technology into their design, maximising power efficiency and reducing energy loss, even in less-than-ideal weather conditions.

Constructed with reinforced material, it offers enhanced durability and a modern, sleek aesthetic that complements caravans, 4WD vehicles, and other outdoor applications.

Whether you’re adventuring off-grid or seeking dependable power for your setup, the 22V 250W Hard Frame Panels are your trusted energy companion, delivering consistent performance wherever you go.

For secure and simple installation, mounting brackets are available for purchase separately.

How to read this datasheet

Detailed specifications for 250W | Short Hard Frame Solar Panel | 22V have not been published yet. iTechworld lists this solar panel in the Solar Panels, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a solar panel, the figures that matter most are open-circuit voltage (Voc) and short-circuit current (Isc) for string design, rated power in watt-peak (Wp) measured at standard test conditions, module efficiency, typically 19–23% on current products and cell technology — mono PERC, N-type TOPCon, HJT, or bifacial. Panels are the generating half of the system and the part that determines how much energy is available at all. They are also the longest-lived component, routinely still producing over 80% of their original output after 25 years.

Before you buy a solar panel

The checks below apply to any solar panel. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Check the physical dimensions against your usable roof area before ordering. Modern modules are large, and a layout that works on paper can fail against obstructions, walkways and setback rules.
Consider N-type TOPCon or bifacial modules where space is tight or the mounting is elevated and reflective — bifacial gains of 5–15% are realistic over a light-coloured flat roof or the ground, and close to zero flush against a dark tile roof.
Keep every panel in a string identical in model and rating. Mismatched modules in one string pull the whole string down to the weakest one.
Compare cost per watt rather than price per panel — a higher-wattage module is often cheaper per watt and needs fewer mounting rails, clamps and cable runs.

Common mistakes

Buying the highest wattage available without checking the inverter's MPPT voltage window — a string that sits outside the window produces less, or nothing.
Assuming rated power is what you will see. Real-world output at midday is typically 75–85% of the nameplate figure after temperature, soiling, wiring and inverter losses.
Underestimating shade. A single shaded cell can suppress an entire string unless you use module-level optimisers or microinverters.

Price and availability in Australia

250W | Short Hard Frame Solar Panel | 22V is listed at A$ 229 (AUD) for Australia. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Australia: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports iTechworld locally before ordering.

250W | Short Hard Frame Solar Panel | 22V — frequently asked questions

How much does 250W | Short Hard Frame Solar Panel | 22V cost?

250W | Short Hard Frame Solar Panel | 22V is listed at A$ 229 (AUD) for Australia. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes 250W | Short Hard Frame Solar Panel | 22V?

250W | Short Hard Frame Solar Panel | 22V is a iTechworld product, listed under solar panels with model reference SHORT-SP250. The iTechworld brand page lists the rest of its range so you can compare across the catalogue.

Is 250W | Short Hard Frame Solar Panel | 22V right for my system?

That depends on what it has to connect to. For a solar panel, check cell technology — mono PERC, N-type TOPCon, HJT, or bifacial, temperature coefficient of power, usually −0.26 to −0.35 %/°C and first-year and annual degradation, and the performance warranty that guarantees them against the rest of your equipment before price enters the decision. Compare cost per watt rather than price per panel — a higher-wattage module is often cheaper per watt and needs fewer mounting rails, clamps and cable runs.

Where can I buy 250W | Short Hard Frame Solar Panel | 22V in Australia?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Australia — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.