Charge Controllers

iTECHDCDC60 | DCDC and MPPT Battery Charger | 12V/24V 60A

A$ 549AUD · price may vary

Model: DCDC60
Specifications: 0

Overview

The iTECHDCDC60 is the ultimate DCDC charger and the biggest in its class. It is engineered for those with larger power systems and offers unmatched performance as one of the most powerful chargers available.

The iTECHDCDC60 charger is engineered to efficiently charge a wide range of 12V automotive or recreational batteries, including Standard Lead-Acid, Gel, AGM, Calcium, and LiFePO4 (Lithium Iron/Ferro phosphate) types. This versatile charger can accept up to 32V input, making it compatible with both 12V and 24V alternators; furthermore, the iTECHDCDC60 can handle unregulated solar inputs up to 48V, thanks to its Maximum Power Point Tracking (MPPT) solar regulator.

Designed for high efficiency, the iTECHDCDC60 charger is compact and suitable for installations with limited space. Additionally, it is engineered to isolate the auxiliary battery from the cranking battery, preventing over-discharge of the cranking battery.

Designed and developed in Australia for Australia, the iTECHDCDC60 is IP20-rated, dustproof and vibration-proof. Built with a heavy-duty case uniquely designed to help with heat dispersion, the iTECHDCDC60 can output a massive 60A of current, ensuring your batteries are back up and running quickly. Mounting brackets are included in the case design, allowing for easy installation in your setup.

Charging auxiliary batteries in modern vehicles equipped with smart alternators can be challenging; the iTECHDCDC60 solves this by enhancing the voltage to the auxiliary battery regardless of the alternator type. This enhancement is also perfect for overcoming voltage drops from long cable runs to caravans and camper trailers.

The new iTECHDCDC60 is fully compatible with all battery types but excels when paired with iTechworld lithium batteries. All iTechworld lithium batteries have low voltage protection and will enter "safe mode" to protect themselves when their voltage dips below 10V. There are various methods to bring an iTechworld lithium battery out of safe mode, but the new iTECHDCDC60 will do it automatically. If it enters safe mode, turn off any load on the battery—the iTECHDCDC60 will take care of the rest.

Package Contents

1x iTechworld iTECHDCDC60 60A Battery Charger

1x Temperature Cable

1 x Ignition Wire

1x Instruction manual HERE

Support

The statutory warranty is 12 months from the date of purchase.

Download the user manual HERE

How to read this datasheet

Detailed specifications for iTECHDCDC60 | DCDC and MPPT Battery Charger | 12V/24V 60A have not been published yet. iTechworld lists this charge controller in the Charge Controllers, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For a charge controller, the figures that matter most are maximum PV open-circuit voltage, the hard limit that must survive cold-morning Voc rise, supported battery voltages (12/24/36/48 V) and chemistries, conversion efficiency, typically 96–99% for a good MPPT unit and whether it offers a load output, temperature compensation and remote monitoring. In any system with a battery and a separate array, the controller is what protects the most expensive component and determines how much of the array's output actually reaches storage.

Choosing a charge controller: the checks that matter

The checks below apply to any charge controller. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Choose MPPT over PWM for anything beyond a very small array. An MPPT controller harvests roughly 20–30% more energy because it converts excess panel voltage into charge current instead of throwing it away.
Size the current rating from array watts divided by battery voltage, then add at least 25% margin for cold, bright conditions where panels exceed their rated output.
Check the maximum PV input voltage against the array's Voc at your coldest expected temperature, not at 25 °C — Voc rises as temperature falls, and exceeding the limit destroys the controller instantly.
Confirm the controller supports your battery chemistry with the right charge profile. Lithium, AGM, gel and flooded batteries need different absorption and float voltages.

Where buyers lose money

Sizing on rated array watts alone and ignoring the voltage ceiling, which is the most common way controllers are killed.
Using a PWM controller with a high-voltage grid-tie panel — the voltage mismatch wastes a large share of the panel's output.
Running the load output beyond its rating instead of wiring heavy loads directly to the battery through a fuse.

Price and availability in Australia

iTECHDCDC60 | DCDC and MPPT Battery Charger | 12V/24V 60A is listed at A$ 549 (AUD) for Australia. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in Australia: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports iTechworld locally before ordering.

iTECHDCDC60 | DCDC and MPPT Battery Charger | 12V/24V 60A — frequently asked questions

How much does iTECHDCDC60 | DCDC and MPPT Battery Charger | 12V/24V 60A cost?

iTECHDCDC60 | DCDC and MPPT Battery Charger | 12V/24V 60A is listed at A$ 549 (AUD) for Australia. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Who makes iTECHDCDC60 | DCDC and MPPT Battery Charger | 12V/24V 60A?

iTECHDCDC60 | DCDC and MPPT Battery Charger | 12V/24V 60A is a iTechworld product, listed under charge controllers with model reference DCDC60. The iTechworld brand page lists the rest of its range so you can compare across the catalogue.

Is iTECHDCDC60 | DCDC and MPPT Battery Charger | 12V/24V 60A right for my system?

That depends on what it has to connect to. For a charge controller, check type: MPPT or PWM, rated charge current in amps, which must exceed the array's short-circuit current with margin and maximum PV open-circuit voltage, the hard limit that must survive cold-morning Voc rise against the rest of your equipment before price enters the decision. Check the maximum PV input voltage against the array's Voc at your coldest expected temperature, not at 25 °C — Voc rises as temperature falls, and exceeding the limit destroys the controller instantly.

Where can I buy iTECHDCDC60 | DCDC and MPPT Battery Charger | 12V/24V 60A in Australia?

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in Australia — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.