Inverters

Sungold Power 10kW 48V Split-Phase Solar Inverter | Dual MPPT 11,000W PV (500V) | WiFi Monitoring | UL 1741 (ETL) | Parallel Up to 6 | 2-Year Warranty

$ 1,580USD · price may vary

BrandSungold

Model: SPH10048P
Specifications: 0

Size your system More from Sungold

Overview

Build a reliable off-grid or hybrid power system with the Sungold Power 10kW 48V split-phase solar inverter. With dual MPPT solar charging, 120/240V split-phase output, and flexible battery compatibility, it’s designed to prioritize solar power to your loads—while seamlessly leveraging grid or generator input when solar and battery aren’t available.

Key Features & Benefits

10,000W pure sine wave output (20,000W peak) — confidently run demanding household loads with clean, stable power.

120/240Vac split-phase + 240Vac single-phase support — power standard split-phase panels and appliances with a single inverter platform.

Dual MPPT solar charging (99.9% tracking efficiency) — capture more solar energy throughout the day for better real-world performance.

Two solar inputs + built-in dual solar controllers — simplifies system design and helps optimize arrays across multiple roof faces or strings.

PV support up to 11,000W with 500Vdc max VOC — enables larger arrays and longer string runs for flexible installs (within MPPT range).

Up to 6 inverters in parallel — scale output power as your energy needs grow without replacing your whole system.

4 AC output modes — match inverter behavior to your priorities (utility-first, solar-first, hybrid, inverter priority).

4 charging modes — choose how batteries charge (solar-only, solar priority, utility priority, hybrid) to fit your site and energy strategy.

Time-slot charging & discharging — align charging/discharging with time-of-use schedules and operational preferences.

Lithium battery wake/activation via mains or PV — helps bring a dormant lithium battery online when utility/PV is present.

Energy-saving mode — reduces no-load losses for improved efficiency during light-load periods.

WiFi monitoring (optional module listed) — check inverter performance and status via mobile app for easier system oversight.

360° protection suite — built-in protections for PV input, AC input, output short circuit, battery OVP/OCP, overload, and bypass over-current.

Specs in a Glance

Model: SPH10048P

Rated Output Power: 10,000W

Peak Power: 20,000W

Output Voltage: 120/240Vac (split phase / single phase)

AC Frequency: 50/60Hz

Waveform: Pure Sine Wave

Switch Time: 10ms (typical)

Parallel Capacity: Up to 6 units

Battery Type: Li-ion / Lead-Acid / User Defined

Rated Battery Voltage: 48Vdc

Battery Voltage Range: 40–60Vdc

Max MPPT Charging Current: 200A

Max Mains/Generator Charging Current: 100A

Max Hybrid Charging Current: 180A

MPPT Trackers: 2

Max PV Array Power: 11,000W

Max PV Input Current: 22A / 22A

Max PV Open-Circuit Voltage: 500Vdc

MPPT Voltage Range: 125–425Vdc

Mains/Generator Input Voltage Range: 90–140V (Single phase), 180–260V (Split phase)

Bypass Overload Current: 63A

MPPT Tracking Efficiency: 99.9%

Max Battery Inverter Efficiency: 92%

Protection Degree: IP20 (Indoor Only)

Operating Temp Range: 14–131°F (derated >113°F)

Noise: <60dB

Cooling: Internal Fan

No-Load Consumption: 100W

Dimensions: 17.9 × 26 × 5.1 in

Weight: 54 lb

Embedded Interfaces: RS485 / CAN / USB / Dry contact

External Modules (Optional): Wi-Fi / GPRS

Certifications: UL 1741 (ETL), IEC62109-1/-2, FCC15 Class B, ROHS, EN61000-6-1/-6-3

Warranty: 2 Years

Ideal For

Off-grid cabins, shops, and homes needing 120/240V split-phase power

Hybrid solar setups using utility or generator input

Systems that need scalable power via parallel expansion (up to 6 units)

Installations needing dual MPPT for multiple PV strings/arrays

User Manual / Documents:

Sungold Power 10kW 48V Split-Phase Solar Inverter User Manual

Reading the specifications

Detailed specifications for Sungold Power 10kW 48V Split-Phase Solar Inverter | Dual MPPT 11,000W PV (500V) | WiFi Monitoring | UL 1741 (ETL) | Parallel Up to 6 | 2-Year Warranty have not been published yet. Sungold lists this inverter in the Inverters, and we add fields as the manufacturer releases them — in the meantime, ask your distributor for the datasheet before ordering.

For an inverter, the figures that matter most are the MPPT voltage window, which decides how many panels go in a string, peak and weighted (European/CEC) efficiency, typically 96–98.5%, topology — on-grid, off-grid, hybrid or micro and continuous AC output in kW, which caps the load you can run at once. It is the component that decides what a solar system can do: how much power you can draw at once, whether you can export to the grid, whether the system keeps running in a blackout, and how well the panels and battery are managed day to day.

What to check before ordering

The checks below apply to any inverter. Run them against the specification table above — most disappointing solar purchases are compatible-on-paper units that fail one of these in practice.

Check the surge rating if you run motors — deep-well pumps, compressors and older air conditioners can draw two to three times their running current for a few seconds at start-up.
Choose a hybrid inverter if a battery is in your plan now or later; retrofitting storage onto a pure grid-tie inverter usually means buying a second unit or an AC-coupled battery system.
Confirm the inverter is approved by your local utility or distribution network before you buy if you intend to export power — grid connection depends on certified anti-islanding and local grid-code compliance, not on the inverter's specifications alone.
Match the battery communication protocol (CAN bus or RS485) between inverter and battery. Compatible voltages are not enough; without a supported protocol the battery management system and inverter cannot agree on charge limits.

What people get wrong

Overlooking the IP rating. An outdoor installation needs at least IP65; indoor-rated units mounted outside fail early.
Buying on peak-watt price alone. A cheap inverter with a narrow MPPT window forces awkward string layouts and can strand a portion of the array.
Ignoring the ambient temperature rating. Inverters derate in heat, so a unit rated 5 kW at 25 °C may deliver noticeably less on a hot roof-adjacent wall at 45 °C.

Price and availability in United Arab Emirates

Sungold Power 10kW 48V Split-Phase Solar Inverter | Dual MPPT 11,000W PV (500V) | WiFi Monitoring | UL 1741 (ETL) | Parallel Up to 6 | 2-Year Warranty is listed at $ 1,580 (USD) for United Arab Emirates. Solar pricing moves with supply, import duties and exchange rates, and distributors set their own margins, so treat this as a comparison reference and confirm the current figure before you order.

SolarBazaar compares equipment rather than selling it. Shortlist here on specification and price, then buy from an authorised distributor or installer in United Arab Emirates: warranty cover on solar hardware is normally honoured through the channel you bought from, so confirm who supports Sungold locally before ordering.

Sungold Power 10kW 48V Split-Phase Solar Inverter | Dual MPPT 11,000W PV (500V) | WiFi Monitoring | UL 1741 (ETL) | Parallel Up to 6 | 2-Year Warranty — frequently asked questions

Sungold Power 10kW 48V Split-Phase Solar Inverter | Dual MPPT 11,000W PV (500V) | WiFi Monitoring | UL 1741 (ETL) | Parallel Up to 6 | 2-Year Warranty is listed at $ 1,580 (USD) for United Arab Emirates. The figure is indicative — solar prices move with supply, duties and exchange rates, and each distributor sets its own margin — so confirm the current price with a supplier before ordering.

Sungold Power 10kW 48V Split-Phase Solar Inverter | Dual MPPT 11,000W PV (500V) | WiFi Monitoring | UL 1741 (ETL) | Parallel Up to 6 | 2-Year Warranty is a Sungold product, listed under inverters with model reference SPH10048P. The Sungold brand page lists the rest of its range so you can compare across the catalogue.

That depends on what it has to connect to. For an inverter, check the MPPT voltage window, which decides how many panels go in a string, peak and weighted (European/CEC) efficiency, typically 96–98.5% and topology — on-grid, off-grid, hybrid or micro against the rest of your equipment before price enters the decision. Choose a hybrid inverter if a battery is in your plan now or later; retrofitting storage onto a pure grid-tie inverter usually means buying a second unit or an AC-coupled battery system.

SolarBazaar lists and compares equipment rather than selling it. Use the specifications and price here to shortlist, then buy through an authorised distributor or installer in United Arab Emirates — buying in-channel is what keeps the manufacturer's warranty valid.

Reviews

No reviews yet

Be the first to review this product.